5 Signs Your Geothermal Systems Need Repair | Heating and Air Conditioning Repair in Fort Worth, TX
Photo By Jacob Lund at Shutterstock
In Texas, heating and cooling make up for more than 33% of residential energy bills. Therefore, to curb these expenses, one must discard the use of conventional heating and cooling systems. Today, homeowners greatly value energy efficiency, and for this purpose, they call for a provider of heating and air conditioning repair in Fort Worth, TX to install geothermal heating and cooling systems. If you don’t know much about these systems, read the following explanation on how these systems work.
The Working of Geothermal Systems
Geothermal heating and cooling systems engage in energy transfer by drawing power from the earth. Beneath the surface of the earth, the temperature of the ground stays relatively consistent during the whole year. These systems consist of a heat exchanger, which is designed like a loop. In these systems, a certain network comprising of polyethylene piping connects the heat exchanger to the earth. In most geothermal systems, you can get a closed loop system which utilizes an antifreeze solution that uses a piping grid for circulation.
In the winter season, a geothermal heat pump depends on a network of an underground piping system. This system supplies the conserved earth heat to your home for heating. In the summer season, the process is reversed, .i.e. it transfers heat from your home back to the earth.
Problems That Can Occur with Geothermal Heating and Cooling Systems
There is no doubt that geothermal heating systems trump conventional heating systems by a mile. They do not only help you with improving the comfort levels of your home, but they also decrease the environmental impact.
More importantly, they don’t need repairs as often as their traditional counterparts. However, your heat pump can still malfunction without a warning. The following signs indicate trouble with your geothermal heating and cooling systems. If you detect any of these signs, contact a provider of heating and air conditioning repair in Fort Worth, TX immediately.
1. Power Loss
According to an expert from a company offering heating and air conditioning repair in Fort Worth, TX, one of the major signs of geothermal issues is an unexpected loss of power. Usually, this happens due to two reasons:
- The interior cabinet is defective
- The problem lies in the loop
In such cases, what happens is that your geothermal system toils harder so it can match your thermostat temperature. You can see for yourself whether it is taking longer to set the right temperature or if it just simply cannot reach the temperature that you set up on your thermostat. Hence, if you happen to find any of these problems, don’t take any longer and call a reliable company for heating and air conditioning repair in Fort Worth, TX.
2. Wet Spots
Go around the area where your coils are buried and look for wet spots. Loops are rarely affected by a water leak, but the possibility still remains nonetheless. Usually, coils get leaks when they are nearing 50 years of use – a duration for which a dependable technician from a heating and air conditioning repair in Fort Worth, TX would recommend a replacement. Keep in mind that loops are filled with water and antifreeze, making the occurrence of wet spots quite irregular.
During the geothermal system installation, the pump consists of a dye that can indicate the source of the leak in the system. Look for bright colors on your soil or lawn, and if you find them, ask a technician for inspection. Always, keep a watch on your geothermal system’s age and consider replacement after it completes 50 years. If your home’s geothermal system was installed before your arrival, ask the previous owner about the year in which it was installed.
3. Coils with Frost
If you can find the accumulation of ice or frost on the oils, something maybe amiss with your heat pump. In the summers, when you set your geothermal heat pump to a cooling mode, ice can form on the coils. The problem can be traced to either any of the loops in the ground or you may be dealing with a refrigerant loss.
If the issue lies with the loops, a professional from a heating and air conditioning repair in Fort Worth, TX can examine it and replace or repair the affected part. On the other hand, in case of refrigerant loss, a leak exists in your system. To address this problem, an expert may clean the coils or repair the affected parts, but it may not be enough, and you might need replacements for the older components.
4. Corrosion
Sometimes, the heat exchange coils of your heat pumps are severely affected by heavy corrosion. Corrosion limits heat exchange, without which, your system cannot operate properly. In old systems, it is common for several sections to become corroded. Therefore, your best in such a case is to contact a heating and air conditioning repair in Fort Worth, TX, for upgrading your system.
5. Increased Energy Bills
Often, homeowners observe significant changes in their bills, but they struggle to deduce the reason to stem from a heat pump issue. Geothermal systems are one of the most efficient systems for heating and cooling; therefore, ideally, you should get moderate bills. If you happen to spot a sharp spike between two consecutive months, have someone dependable from a heating and air conditioning repair in Fort Worth, TX inspect your system. If you neglect to call for help, your bill and maintenance costs will only increase in the future.
Final Thoughts
If your geothermal heating and cooling system exhibits any of the signs mentioned above, hire a professional from a heating and air conditioning repair in Fort Worth, TX, on an immediate-basis. You need a well-known company for heating and air conditioning repair in Fort Worth, TX, that is not only reliable and experienced but also boasts all the necessary qualifications.Call One Hour Air Conditioning and Heating today and become free from all of your geothermal system issues.