Heating and AC in Azle, TX: Performing an Installation on Your Own is Not Easy at All
Installing either an AC or, for that matter, even a full-fledged HVAC (heating, ventilation and air conditioning) unit that is quite capable of both heating and AC in Azle, TX, is undoubtedly a difficult task, to say the least.
This is indeed precisely why it should almost always be left to the real true blue experts and professionals who have both the requisite expertise as well as the necessary experience in this field. And it makes sound sense to call in the professionals because of the varied nature of the different tasks that will be required to complete the job at hand. After all, installing a climate control system includes skills, ranging from masonry to electrical engineering, all the way to plumbing and ducting work.
As a matter of fact, it is only the real ‘true blue’ professionals who are suitably well versed in the field ofinstallation of heating and AC in Azle, TX. This is because they actually do have the know-how as well as all the requisite experience to get the job done correctly the very first time. Here, it is pertinent to understand that just about any such D.I.Y (do it yourself) procedure must never be carried out by a rank novice, unless the individual in question is an experienced as well as duly qualified specialist who has to his credit multiple HVAC installations.
Following is a brief look at the many different tasks that will have to be performed before the climate control system can become fully functional. Basically, the procedure involves multiple installations for the indoor unit as well as the outdoor unit and if desired, the installation of the furnace, as well.
o Installation of the Indoor Unit
These days furnaces and bulky HVAC units are now rapidly being replaced with the more modern ‘heat enabled’ split AC units that perform much the same functions. They are also fully capable of both cooling as well heating even really large rooms with the same degree of efficiency as their HVAC counterparts. However, proper installation is key to optimum service. Should there be any leaks, then the climate control system will be compromised and will not be able to provide the level of heating and AC in Azle, TX, for which it had been installed in the first place. There are certain points with regard to its location and placement that are as follows:
The indoor unit has to be placed in such a manner that there is absolutely no obstruction between the room and the air throw emanating from the blower unit. In other words, the ‘throw’ of the blower should be able to reach each and every nook and cranny of the room. The blower should be placed around seven feet or so above the floor of the room in order to ensure uniform airflow throughout the room. Apart from that, it should always be completely surrounded by clear space of at least 24 inches above, below and to the sides of the unit. Furthermore, there should be no hindrance or obstruction with regard to the furniture and/or furnishings (drapes, curtains blinds etc.) so that the air can circulate in the room with relative ease.
Here it is pertinent to note that under no circumstances should the unit be placed right in front of a ventilation outlet or window. The sunlight streaming through can heat up the cold air before it gets a chance to cool the room. Alternatively, placing the blower unit close to the window might mean that cold air can interfere in the heating process and reduce the efficacy of the climate control system.
o Installation of the External Unit
The external unit of just about any HVAC or split AC unit that is more than capable of both heating and AC in Azle, TX, should always be properly installed in a suitably cool and dry place. In other words, it should never be exposed directly to really harsh sunlight or other performance degrading environmental factors that can mar its efficiency.
Here the key point to remember is the elevation of the unit. It has to be at least half a foot above the ground in order to ensure that it will not be prone to overheating. The standard practice is to create a concrete platform and install the unit on it. Furthermore, the unit should be surrounded by empty space so that the airflow is not constrained in any way. The good people responsible for heating and AC in Azle, TX, will make sure that these issues are well taken care of while you have to make sure that the area around the unit is always kept clean and well maintained. They will make sure there is no dirt, falling leaves or other debris around. This must be done because the hot air being removed from the room should have a chance to disperse. If the immediate area around the unit is blocked, then the hot air will not be able to dissipate and therefore, the machine will not be able to work at its optimum efficiency.
Lastly, the unit must be installed in a place where it will be easy to carry out periodic service and maintenance activities without any hindrance.
o Conclusion
If you have any further questions or queries or want to know more about the proper method of installation of heating and Air in Azle, TX, then it would be worthwhile to call in the good people at One Hour Heating and Air at http://www.onehourairftworth.com. This is because these people are not just good, but in fact, they are also the proven specialists in this field in the Azle, TX, area.