How Can You Benefit From Having An AC Repair Company Inspect Your HVAC System Regularly?
Although an air conditioning system is critical in many Texan homes, some homeowners need to give them due attention. This could be because the system can be cooling or heating your home for a long time. Unfortunately, this doesn’t mean that all is well with your unit, and this is where regular inspection plays a key role. It is worth noting that an air conditioner might have underlying problems and still cool or heat your home. However, some underlying issues reduce the efficiency and effectiveness of the unit in cooling your home, increase wear and tear, and result in the unit using more electrical power. By ensuring an AC repair company inspects your unit and comes for an air conditioning service, some of these issues can be caught early and addressed. What are the other benefits of a regular heating and cooling system inspection?
Keeps Your Family Safe
While most homes are heated using heat pumps, most homeowners prefer gas-powered furnaces. Compared to electrically powered furnaces, gas heaters are more efficient and heat your indoor space quicker. Unfortunately, there are several drawbacks when it comes to the use of gas furnaces. Gas furnaces have a serious safety issue in that they potentially can result in carbon monoxide poisoning. This arises when there is an incomplete combustion of the natural gas. If not detected earlier, carbon monoxide poisoning can result in injuries and, at worse, death. Thus, the area residents must institute additional steps to reduce the likelihood of carbon monoxide poisoning.
There are several ways through which carbon monoxide can enter your indoor space. However, improperly installed or deteriorated exhaust vents and cracked heat exchangers are the leading causes. Professionals from your reputed AC repair company have the required skills and equipment to diagnose the problem. They can also give you several recommendations to address it. While at it, you also should install a carbon monoxide detector at your home to add an extra protection level. These detectors will sound an alarm whenever there is a carbon monoxide leak. You should install a carbon monoxide detector on every floor, sleeping area, and basement.
Reduce Operating Expenses
Although the cost of living in Texas is about 8% lower than the nationwide average, the cooling and heating costs take up a sizable percentage of the homeowner’s budget. Hence, it would help if you kept the heating and cooling expenses as low as possible. Among the best ways of accomplishing this goal is ensuring your home’s HVAC system is efficiently functioning. Scheduling an inspection by a professional is the initial step toward ensuring low cooling and heating expenses. Systems that aren’t serviced after a long time will work harder to heat or cool the indoor air, meaning it will not be as comfortable. This means utility costs to operate the unit will increase. Rather than enduring these high operating costs, have the unit inspected by a technician to uncover and resolve any underlying problems.
It Helps Avoid Emergency Repairs
Without a regular air conditioning service and inspections, even the routine problems might quickly add up, resulting in more expensive emergency air conditioner repairs. The last thing you want is for the air conditioner to break down in summer, at midnight, weekend, or even when the technicians are on holiday. Calling the technicians of an AC repair company off from their homes is inconvenient for them. Additionally, repairs done during the off-hours will cost you more than those planned during typical working hours.
Further, it may take more time for the repair technician to respond to your issues during the off hours. If the weather is scorching or freezing, that might mean that you’ll have to contend with an uncomfortable home until the professional arrives to deal with the problem. This could be more worrying if one of your family members has pre-existing medical issues. The professionals recommend that you schedule routine inspections to help catch any underlying or developing issues early to reduce the odds of emergency air conditioning repairs.
Understanding When to Upgrade Your Cooling and Heating Appliance
One thing is sure, no air conditioner or furnace will last forever. There comes a time when the frequent repairs no longer make sense. The economic value of the repair far dwarfs that of replacing the unit. Further, homeowners today understand the need to upgrade to eco-friendlier, more energy-efficient appliances.
During the air conditioner inspection, the professional will evaluate the existing cooling and heating appliance to determine when and if a replacement is required. After careful consideration of the system’s age, frequency of repairs, government regulations, and other factors, the technician might, at some point, recommend that you replace the unit. Unfortunately, it might be at times recommended by the technician that you replace the unit immediately. For instance, if the furnace’s heat exchanger is cracked, you must instantly turn off and replace the furnace to avert the danger of exposure to carbon monoxide poisoning.
Prolongs the Life of Your HVAC Equipment
Air conditioning equipment replacement costs vary based on the model and type of appliance selected. However, the baseline remains that replacing any air conditioning unit will be pretty expensive. Hence, you should leave nothing to chance regarding ensuring your current system serves you longer. Cooling and heating appliances will last longer and need fewer repairs when appropriately serviced. This is the reason why any AC repair company will recommend that you have a routine HVAC inspection. The professionals are trained to identify and address developing issues before they worsen and result in system failure. However, there is a caveat. If your HVAC is old, it will be less efficient than relatively new ones.
Avert Emergencies with Routine AC Inspections
As can be seen from the above, there are many benefits to AC inspections. Do you need your HVAC services inspected? Book an appointment at One Hour Air Conditioning & Heating of Fort Worth.
See our most recent blog on this topic here.
Find out our service area here.
Photo By PeopleImages at istock
Duct Cleaning Service FAQs
Any investment in your home that keeps it in good condition for you and your family and provides you with a safe place to live is well worth it. For many people, one of the lesser known but equally important areas to maintain is their ducts. Your ductwork runs throughout the home, behind walls, and in ceilings to help transport heated or cooled air from one area to the next. If there are problems within that space, it can be very difficult for you to get the best level of energy efficiency possible. That is when duct cleaning service is necessary.
What Is Duct Cleaning?
Duct cleaning service is the process of removing all of the debris and buildup that gets inside the ductwork. Just like cleaning your home and removing the dust from the inside of it, duct cleaning is critical to getting all of that debris out. This cleaning process is not as easy as dusting furniture, though, because the ducts themselves are not typically accessible to you. That means that it can be nearly impossible for you to access the ducts on your own to remove the buildup.
With a professional company, it is possible to do this. The team will use a variety of high-powered equipment and resources to remove all of the material that is built up within your ducts. This process is efficient and can be done in a few hours, but it is also one of the most thorough. If you are unsure if you need this type of service or if there are benefits to investing in it right now, turn to a professional company for insight into your home’s current condition, potential needs, and how the process will be conducted as well.
Is It Safe to Clean the Ducts?
The ducts in your home are one of the most important tools for moving air from the heating or air conditioner to each of the rooms of your home. The air moves from these systems into each of the rooms of your home, pulling with it whatever is in the ducts. It is very important that you maintain them and remove all of the dust and debris that builds up in them, or you may be moving highly dusty and even bacteria filled air throughout the space.
When wondering if it is safe, then, to clean your ducts, it definitely is something you want to do. Air duct cleaning service is very safe and can be a critical tool for protecting the quality of air throughout your space. If you are working with a qualified, professional company that does the job properly, there is no negative outcome for having this done. In many ways, it can be a critical tool for keeping you safe.
How Often Do You Need to Clean Your Ducts?
Cleaning your ductwork is something you should do on a routine basis. How often you do so depends on various factors, especially related to where you live and the overall condition of your home. Most of the time, you will want to have your ducts cleaned anytime you start to notice a buildup of dust within your home.
Most property owners should have their ductwork cleaned at least one time every other year, but if you live in an area where there is a lot of construction going on near you, including landscaping work, or you have had a significant amount of remodeling done within your home, it is best to do this more often, even as often as one time every six months.
Some of the signs that you may want to have your ducts cleaned more often include:
- Your home has a lot of dust. After you remove the dust from surfaces, it seems to come back often.
- You have to change your home’s heating and air conditioning filters on a constant basis, often more often than you used to.
- You notice odors that linger in the home, such as from cooking. This may occur more frequently over time.
In these situations, it is best not to wait but to get air duct cleaning right away.
How Long Will It Take to Get the Ducts Cleaned?
A variety of factors play a role in how long the process of cleaning your air ducts will take. Most of the time, the process is done within an hour or two, and sometimes less than that. The ultimate factor in the cleaning process is how large your home is. The larger it is, the more ductwork there is to clean out.
The secondary factor is how frequently you have them cleaned. If you have not had your air ducts cleaned in the past, it may take a bit longer to have them done the first time. However, routinely having them done can help minimize the risk of complications over time, and that means that the next time the process should be faster.
The key here is ensuring you are working with a duct cleaning service that will take the time to do the job properly. You want to make sure that the ducts are fully cleaned and that the technicians do not rush through the process. The good news is this may be easier to do than you realize if you hire the right company to help you.
What Are the Advantages of Duct Cleaning?
One of the most important questions you can ask when it comes to duct cleaning is why do it. What is it going to provide to your home? The good news is that most people will see a lot of benefits from having their ductwork cleaned on a routine basis. There are some common benefits most people see.
It Creates a Cleaner Living Environment
Your home’s heating and cooling system draws in air from within the home and from outside to treat and then push through the ductwork to move it throughout your space. As it does, that air can move dander, debris, allergens, and even bacteria throughout the home. When you have the ducts cleaned on a consistent basis, that helps to make your home’s air quality better.
This means that you are likely to have less dust and debris landing on your home’s furniture, bed, kitchen countertops, and other areas. This can help to make the interior of your home cleaner and easier to manage.
It Reduces Irritants in the Air
Another key benefit is that duct cleaning service can help to remove many of the allergens that come into your home from outside, including pollen. If there is someone in your home who is specifically susceptible to allergens like mold, mildew, pollen, bacteria, or pet dander, this type of service, done on a routine basis, may be critically important to improving the quality of the air they breathe in.
If you or someone in your home has asthma or allergies, or other types of respiratory ailments, it is essential to have routine air quality inspections and, when necessary, have the air ducts cleaned. This helps to minimize the risk of those irritants causing illness.
Remove Unpleasant Odors
Another key benefit is that this simple to use service can also help to remove many of the odors and smells that you have in your home. If you have odors that linger in your home for days, it may be due to a buildup of material that occurs in the ducts. Over time, this can worsen and cause a variety of health ailments for you. However, it also makes your home smell less fresh.
Consider having duct cleaning done when you have odors from food or cooking or even musky smells. This can help remove much of that debris that is trapping those odors out of your home’s ducts and give it a fresh scent again.
Improve Energy Efficiency
One of the best reasons to use an air duct cleaning service is because it could save you money. Your home’s air ducts are designed to create an efficient space to move heated and cooled air throughout it. However, when you have ducts that are clogged with material, that becomes very hard to do. The air cannot easily pass through the ducts, and the debris gets caught on the vents. That means your home’s heating and cooling system has to work much harder just to get to the temperature you desire.
By having your ducts cleaned, it is possible to allow heated and cooled air to move easier throughout your home. The direct result of this is that you will have better efficiency in your heating and cooling system, which ultimately means that your energy bills could drop. It can also help to make your home a bit more comfortable to live in as well.
Do I Need to Hire a Professional for Air Duct Cleaning?
It is always beneficial to use a professional duct cleaning service to help you with this project. There is no efficient way for a homeowner to do this type of work themselves. That is because it takes high powered vacuums and sanitizing equipment to properly and fully remove the material buildup from within your ducts. While you can certainly work to change out the filters on your heating and cooling system, it may be best to turn to a professional for the actual duct cleaning.
Just Moved into a Home? You Need Duct Cleaning
Did you know that when you move into a home, you are exposing yourself not just to a new environment but all of the unknowns of the people who lived there before you? That includes any dust and dander from their pets. If they smoked, there could be a lingering odor of it in the home. If they had pets, you may feel like you smell a dog all of the time.
Calling to schedule a duct cleaning before you move into your home is very important. It can help you to remove all of that unknown bacteria from your home while also working to ensure you do not have any type of bacteria or unknown particles coming into the breathing environment of your new space. In short, it helps you to clean up the air.
Should You Use a System to Remove Bacteria?
There is a wide range of ways to clean ducts, and some of the best services use an antimicrobial chemical to help cleanse the interior of the ducts themselves. This could be a beneficial step if you are concerned about any type of mold or mildew growth present in the ducts themselves or if you have someone living in your home that is very much at risk for health issues. This method can help to remove mold and mildew fungi while also helping to minimize the presence of bacteria and viruses.
How Do You Know Who to Call?
You may have some concerns about which professional to call to help you with your ductwork. The good news is you can do a bit of research to get to know the providers in your area to find one that is best suited for your needs. Look for those that are licensed and bonded. You also want a professional company that can be reliable in showing up at your home on time. Seek out a company with a proven track record of providing superior service, too. Look for a duct cleaning service that helps you to feel comfortable with the workmanship they offer.
Get Your Ducts Cleaned Now
Turn to a trusted duct cleaning service to help you with your home’s needs. At One Hour Air Conditioning & Heating of Fort Worth, we can stop by, help you determine if duct cleaning is beneficial, and then set up an appointment to have the work done. This is an easy way for you to improve the quality of air in your home. Contact us today to learn how we can help you.
See our most recent blog on this topic here.
Photo By amasterphotographer at Shutterstock
Dampers, Grills, Registers, And Diffusers; Understanding Their Role In An HVAC System From Your Air Conditioner Installation Company
Have you ever considered how your home would be without an HVAC system? With all the cold winters, summer heatwaves, and temperature fluctuation of each weather season, it would only be possible to survive with a reliable temperature-controlling system. A heating, ventilation, and air conditioning system protects you and your family from uncontrollable weather patterns by allowing you to choose your appropriate temperature. In addition, an HVAC system helps you protect your family’s health and well-being. Without a trusted heating system, your health would be in danger, especially on cold winter nights, from hypothermia and heat stroke on sunny summer days. Therefore, it is essential that you understand this system that gives your home so much comfort and protection. But since you cannot be as good as an air conditioner installation professional, starting with basic parts such as dampers, grills, registers, and diffusers is best.
Introduction to an HVAC System
Before we get to the operation of the individual parts, it is essential to know the system as a whole. An HVAC system combines components that regulate your home’s temperature and humidity. These components ensure your home is always comfortable and always at the needed temperature. To achieve your temperature requirements, your HVAC system usually incorporates four main components: dampers, grills, registers, and diffusers.
A damper controls the air that passes through an air duct system by blocking off certain areas or opening them up depending on the air supply needed. To effectively achieve this goal, the damper is located inside the air ducts where they are not easily seen, but an air conditioner installation company can easily access them. The regulation of air through the duct system helps minimize energy usage in your home. The system helps you achieve this by allowing you to choose the zones to be heated or cooled. Consequently, the HVAC system concentrates on air conditioning these areas and conserves the energy for the unused areas in your home.
Grills protect diffusers from harmful pollutants such as dust, dirt, debris, and pets. Therefore, they act as covers and are found over the diffusers to meet their purpose. Since grills are vital for filtering fresh air from particles that can harm diffusers, they must be regularly cleaned for optimum functioning.
Registers, on the other hand, are located on either side of a damper. Their primary purpose is to monitor the incoming airflow in an HVAC system; hence adjustable vanes. The vanes decrease or increase the airflow in an air duct depending on the area’s needed temperature.
A diffuser controls where conditioned air from the HVAC unit does to provide the needed temperatures to your home. In addition, the diffuser regulates your home’s humidity levels when needed. Therefore, when the humidity levels in a room are too low or too high, the diffuser regulates them back to normal levels. The diffusers also evenly distribute heated or cooled air from the HVAC system into a room, improving its airflow as per the instructions of the HVAC system.
What Are Dampers?
Dampers are components of a heating, ventilation, and air conditioning system used to regulate airflow. Dampers are manufactured in different shapes and sizes. However, the most common dampers are a plate housed in a metal frame. The plate is the movable part that controls the airflow depending on your home’s temperature needs.
Dampers are crucial to the HVAC systems since they affect the temperature and pressure in the ductwork of an HVAC system. In addition, dampers enable the system to control the airflow in specific locations, such as return grills and supply outlets. When you want to change the configurations of your home’s damper, a professional can adjust the damper automatically or manually. The technician will either use a motorized actuator or a thermopile to adjust a damper to your liking successfully.
The placement of dampers in your system depends on the purpose they aim to achieve. For instance, dampers can be installed in airstream registers, grills, or diffusers. When installed in registers, they are found on ceilings or walls that supply cooled or heated air within an interior space. Conversely, when installed in grills, they move the conditioned air into living spaces. Finally, if installed on diffusers, they equalize the room temperature by dispensing cooled or heated air for a comfortable space. Dampers allow a series of ventilators to share some of the air flows from the system when necessary. This makes your system more energy efficient since it does not waste energy.
What Are Registers?
In simple terms, registers are the air outlets in your home in an HVAC system. In most homes, registers are positioned on floors, walls, and ceilings to supply the home with conditioned air from the heating, ventilation, and air-conditioning system. Registers have shutters that can be adjusted mechanically or manually depending on your HVAC system. The ability to adjust shutters allows you to control the airflow in your home.
Registers also trap the dust, dirt, and other particles in your home’s breathing air before they reach the HVAC system. Therefore, they act as filters for airborne contaminants. Since registers vary in design, you can choose the best fitting design from traditional to modern ones. Registers control your home’s airflow to ensure a comfortable indoor environment all year round. Therefore, you should have regular maintenance and cleaning service from a trusted air conditioner installation company for their continuous operation.
What Are Grills?
Grills are vital components in an HVAC system whose primary purpose is to regulate the airflow through your home’s duct system. They help ensure proper air distribution throughout your home. They also operate as a filter of debris and dust from the HVAC system. You can find grills in either rectangular or round shapes, which vary in design. Some popular grills in the market include louvers, adjustable directional air outlets, egg crate grilles, and perforated grilles.
What Are Diffusers?
A diffuser is part of a heating, ventilation, and air conditioning system that evenly distributes heated or cooled indoor air in your home. Evenly distributing the conditioned indoor air in your home helps provide each room with even temperatures. Diffusers come in different sizes, which depend on the size of your HVAC system. In addition, they are also available in different shapes, and their operation depends on their type. Diffusers can be categorized as return diffusers and supply diffusers. Return diffusers are a type of diffuser that draws contaminated and stale indoor air from your home and extracts it outside. They also allow fresh outdoor air to replace the removed contaminated air in your home. An air conditioner installation technician will mount the return diffusers on your home’s walls or ceiling tiles.
In contrast, supply diffusers, also known as grills, dampers, or registers, transport heated or cooled air from the HVAC system to the required room in your home. They usually have adjustable louvers, giving them airflow control per your temperature needs. Use a suitable diffuser for your HVAC unit to correctly distribute heated or cooled air in your home. The right size and proper location of diffusers ensure that your home does not experience temperature imbalances. It also helps avoid unnecessary energy loss through inefficient indoor air distribution patterns.
Operation of Dampers, Grills, Registers, and Diffusers in an HVAC System
Dampers, diffusers, grills, and registers are vital to the operation of an HVAC system. Each system serves a specific purpose which, when brought together, makes the HVAC unit effective in controlling your home’s temperatures. Below is an overview of how they work together to provide your home with comfortable temperatures.
Damper
A damper, also known as an airflow valve, controls the heating, ventilation, and air conditioning system. An air conditioner installation technician installs it inside the ductwork, regulating the flow of conditioned air from the HVAC system to your home.
A damper adjusts the airflow in your HVAC system to maintain the comfortable temperatures required in your home. In addition, dampers can shut off airflow to some rooms in your home when not in use to maintain the system’s energy efficiency and prevent energy wastage. The air volume in your HVAC system is regulated through manual adjustable louvers or motorized dampers.
Registers
Unlike dampers inside the ductwork of the heating, ventilation, and air conditioning unit, registers are found on the ceilings and walls of each room in your house. Their primary purpose is to deliver heated or cold air from your ductwork into your house. The size of the register an air conditioner installation technician uses in each room depends on the area of the room where it is used. Therefore, the register used in a big room differs from that used in a small space. This is because the load capacity of each of these rooms varies. However, regardless of the register size, they all serve the same purpose: to ensure that your home has the needed temperature and is comfortable.
Grills and Diffusers
In most heating, ventilation, and air conditioning units’ grills and diffusers perform a similar function of distributing conditioned air into your house. Although they perform this general function as their primary feature, grills and diffusers use different methods. On the one hand, air flows in one direction only through multiple slits in grills. Therefore, you can direct your conditioned indoor airflow to a specific room. You also control the volume and velocity levels of the conditioned air due to different opening sizes. In contrast, the diffusers use round disks or curved blades to deflect the heated or cooled air in two opposite directions. The splitting of the conditioned air allows you to control how much air from the HVAC system is released into each room.
In a nutshell, when installed by an air conditioner installation professional, dampers help you regulate the amount of heated or cooled air flowing into every room of your home. Registers transport the conditioned air by your heating, ventilation, and air conditioning unit exactly where you need it. Grills direct the conditioned air where needed and adjust the levels. Diffusers release the heated or cooled air evenly and at controlled velocity levels to the room. Therefore, to maximize the efficiency of these four HVAC components and facilitate their working together, dampers, registers, grills, and diffusers should be regularly inspected, cleaned, and tuned up by an experienced professional.
Benefits of Using Dampers, Registers, Grills, and Diffusers in Your HVAC System.
Dampers, registers, grills, and diffusers are essential in bringing the HVAC system operation together and delivering conditioned air to your home. These components control the flow of heated and cooled air in your home. Some of the advantages of these components include;
Relatively Simple Installation
These components’ installation is easy for an air conditioner installation professional. Unlike ducts which require specialized tools and can only be installed in preselected areas, dampers, grills, registers, and diffusers can easily be incorporated into a heating, ventilation, and air conditioning system.
Airflow Control
When you control the direction and quality of indoors in your home, you can quickly achieve the comfort levels you desire from your HVAC system. Dampers allow you to customize your HVAC system so that different areas have different temperature settings.
Reduce Noise
Since dampers regulate airflow, they act as noise cancellers and muffle different sound ranges. Therefore, when an air conditioner installation pro installs dampers, grills, diffusers, and registers for your HVAC system, you will have smooth indoor airflow throughout your home. There will be reduced mechanical noises that would otherwise be noticeable as it comes out of the vents.
Cost Efficient
Incorporating these components into your home reduces your system’s energy consumption and bill.
When used together, dampers, grills, registers, and diffusers regulate and optimize your home’s airflow. Contact us at One Hour Air Conditioning & Heating of Fort Worth for installation and maintenance services of dampers, grills, registers, and diffusers.
See our most recent blog on this topic here.
Photo By The Toidi at Shutterstock
Avoiding Closing Vents For Temperature Control As Explained By An AC Repair Technician
As a homeowner, the comfort of your home is paramount. However, even though you want the best systems and appliances to complete your home, there is a very thin line between comfort and expense that you must constantly be aware of. Therefore, you are always looking for the best energy-saving tips and AC repair professional guidelines on what to do. Unfortunately, most homeowners will only try every suggested energy-saving tip after knowing the consequence. For example, closing vents in vacant rooms is a popular tip. Most people think blocking the vents to the empty rooms optimizes their HVAC systems by redirecting cooled or heated air to needed areas. However, blocking vents can reduce the optimization of your HVAC system.
How Does an HVAC Ventilation Work?
To understand the impacts of blocking the vent of your home, you should first understand how the ventilation works. For air to move in and out of your home through the vents, it needs an external force. Therefore, the external force from your HVAC system comes as a fan. For the cooling process, the air in your system goes through the condenser then the blower fan distributes it in your home. A motor usually drives the fan, so AC repair technicians call it a fan motor. Notably, your home’s fan motor can be fixed or variable, depending on the model, make, and type of your HVAC system. A variable motor uses a sensor to detect and adjust the air pressure in your home. However, indoor air pressure does not affect a fixed motor since it always runs at a fixed rate. Therefore, due to its operation principle, an HVAC system with a variable fan is more expensive than its counterpart.
Why Blocking Air Vents Is Not Advisable
Some of the significant reasons why you should not close your ventilation system during winter include the following:
The HVAC System Working Principle
As seen above, not all heating and cooling systems work in the same principle. Their operation principle is usually based on the system’s motor fan type. Therefore, unless told by an AC repair technician, you cannot be sure of the kind of fan in your heating, ventilation, and air conditioning system. Therefore, your HVAC system may not have sensors to detect when the air pressure in your vents.
Since your system cannot tell if your home’s vents are closed or opened, it will operate according to the setting on the thermostat. Therefore, the system will use the same energy to produce the same heated or cooled air, whether the vents are opened or closed. So, blocking the vents does not affect the energy usage or the electricity bill at the end of the month.
Imbalanced Pressure
Blocking the vents of your heating, ventilation, and air conditioning unit has side effects, such as an imbalanced pressure in your home. This is because although the vents are blocked, and no air is going through them, the return register in the system remains open, allowing air to pass. The visible vents on your home’s walls are the supply register. These vents supply your home with air from the system.
Conversely, your HVAC system has another set of vents known as the return registers. These sets of vents draw air from your home to the system. Therefore, since the return register is still open, it keeps drawing air from the room, but the supply register does not release, creating low pressure in your home. Eventually, outdoor air will slip into your home through holes, gaps, or cracks in the windows and doors. Consequently, the outdoor air will increase or decrease your indoor air, thus affecting the temperature. A prolonged imbalanced pressure in your home leads to reduced air quality.
Temperature Imbalance
One of the primary uses of your HVAC system is to control your home’s air supply volume through internal dampers. In addition, the system requires adequate airflow volume to maintain a consistent temperature in your home. Therefore, when you close the vents, you disrupt the airflow and, thus, the temperature balance throughout your home. Temperature imbalance in your home can lead to issues with the airflow in rooms too far away or close to the blower fan.
Lower System Lifespan
Closing the supply register of your HVAC system leads to static pressure formation in the ductwork. This pressure, in turn, gets to the blower, which becomes more strained. Consequently, the blower has to overwork to keep up with the temperature needs of your house. An overworking blower can weaken other components, such as the condenser, leading to a shorter life span.
Home Heating and Cooling Tips
During the installation of your HVAC system, the AC repair expert ensures that your system is ideal for your home. Therefore, closing the vents means you interfere with some preset specifications, such as the size of your home and the space the system cools. Consequently, it affects the functionality and efficiency of the system. Below are some of the safety tips to use when looking to save costs.
Thermostat
The best place to start when looking to change your home’s temperature configuration is the thermostat. Set the thermostat temperature as low as possible to get your desired temperature. In addition, you can incorporate other facilitating devices, such as fans, to help you cool your home. You can put insulations on your windows or use a window treatment to take it further.
HVAC Zoning
Another addition that can help with maintaining your home’s temperature is HVAC zoning. A zoning unit will categorize your house into different zones whose temperature you can control separately.
Don’t Shut the Vents Off
The best way to find safe, effective, cost-efficient tips is to consult an HVAC professional. The technician will walk you through the dos of your HVAC system without compromising the functionality and health of your system. Contact us at One Hour Air Conditioning & Heating of Fort Worth today for any air conditioning service.
See our most recent blog on this topic here.
Photo By Jason Kolenda at Shutterstock
Check out this tip!