Issues To Be Handled By A Professional AC Repair Company

Issues To Be Handled By A Professional AC Repair Company

Wherever you are in Texas, you can appreciate the importance of having a functional air conditioning system in your house. The weather can, at times, get scorching, and you need an air conditioning system to keep your ambient temperatures within a comfortable range. Indeed, without a properly working AC, it is hard to imagine how your family would survive the summer heat. Unfortunately, although your air conditioner may be extremely durable and dependable, it is not indestructible. Therefore, it can develop several mechanical and even electrical problems that can compromise its performance and even put your family and house in danger. This means that you will need to get it repaired or serviced at some point. However, no matter how much you enjoy DIY projects, there are some air conditioning issues you should never be tempted to handle on your own. Instead, you should have an AC repair company that can be trusted to fix even the most complex air conditioning issues you might run into. Below is a rundown of some potentially serious air conditioning issues that must be handled by a professional air conditioning service provider.

A Frozen Evaporator Coil

The evaporator coil is an essential component of your air conditioning system. It is located in the air conditioner’s indoor unit. It is made of a network of copper tubes whose function is to increase the surface area for the refrigerant flowing through it to absorb heat optimally. However, for your air conditioning system to work as it should, the surface of the refrigerant coil must be clean and relatively warm. Therefore, if you have noticed that your air conditioner’s refrigerant coil is freezing up when the weather outside is hot, you could be staring at a serious air conditioning failure. In most cases, the coil freezes up due to poor air circulations caused by clogged air filters and blocked air registers. But whatever the cause of the problem might be, it can have devastating impacts on your air conditioner. This is because a freezing evaporator coil can cause the refrigerant to condense, which might put the compressor at risk of getting damaged. Unfortunately, repairing or replacing the compressor can be extremely expensive. In some cases, a broken compressor might make it necessary for you to replace your air conditioning equipment entirely. Therefore, if you have noticed that your air conditioner’s evaporator coil is freezing up in summer, you need to immediately switch off the unit and make an emergency call to your AC repair company. By doing this, you can protect the compressor from suffering severe damage and save a lot of money in the long run.

Low Refrigerant Level

The refrigerant is also an integral component of your air conditioning system. It is a chemical with the ability to easily absorb and release heat. It is usually circulated between the evaporator coil and the condenser coil. When the chemical is in the evaporator coil, it absorbs heat from your indoor air. This causes it to evaporate. The vaporized refrigerant is then pumped to the condenser coil (located in your air conditioner’s outdoor unit), where it condenses as it releases heat into the atmosphere before flowing back to the evaporator coil. As the cycle continues, the indoor air gets cooler.

For your air conditioning system to work as it should, it must have an adequate amount of refrigerant. The good news is that since the refrigerant is circulated in a closed system, it does not need refilling. However, the hoses through which it is circulated can deteriorate and develop leaks with time. This will cause the level of the refrigerant to drop, causing the air conditioner to perform poorly. For instance, low refrigerant levels will make it more difficult for your AC to cool your home and consequently increase your electricity bills.

However, It is important to note that if your air conditioners refrigerant is leaking, trying to repair it on your own could be extremely dangerous, This is because it might expose you to the risk of Freon poisoning, which is associated with symptoms like headaches, nausea, vomiting, fainting, seizures, and even death. Therefore, if your air conditioner’s refrigerant level is low, you need to consult a professional AC repair company. The professional will locate the leaks and seal them correctly before refilling the refrigerant.

Water Leaking from the AC

Under normal circumstances, no water should be leaking from your air conditioning system. Therefore, the area near the indoor unit should be fairly dry. Therefore, if you have noticed a puddle of water collecting around your air conditioner’s indoor unit, then you could be facing a serious air conditioning failure. In most cases, water leaking from an air conditioner is usually a result of a clogged condensate drain line. But where does this water come from? In addition to cooling your home, your air conditioner helps with removing excess humidity from your indoor air. As the warm air drawn from your house is blown over the evaporator coil, the water vapor in it condenses. The condensate is collected by the condensate drain pan. The water then joins the condensate drain lines that direct it out of your house.

If the condensate drain line is clogged, the water will not flow out as expected. Instead, it will back up, fill up the condensate drain pan, and spill over to the floor. Some of this water might end up damaging some components of your air conditioning system. Besides, the leaking water might create dampness that could welcome a mold infestation in your house. Unfortunately, mold can compromise your indoor air quality, cause structural damage, and even trigger allergies. Therefore, it is important for you to make an urgent call to your air AC repair company as soon as you notice that your air conditioning system is leaking water.

AC Blowing Hot Air

Your air conditioner is essentially supposed to cool your indoor air. It does this by drawing the hot air from the various rooms in your house through the return ducts and circulating it through the air handler, where it is cooled before being blown back to the various rooms in your house through the supply ducts. Therefore, when your air conditioning system is working optimally, the air coming into your house from the air handler should feel cool. Therefore, if you have noticed that the air coming in through the vents feels hot, then your air conditioning system could be broken. There are many issues that could cause your air conditioning system to blow hot air into your house. For instance, if the supply ducts are leaking, they might lose the cooled air coming from the air handler and suck in the hot air around them, causing your air conditioning system to blow hot air into your house. Similarly, if your air conditioner’s compressor is broken, the refrigerant will not be circulated as expected, and therefore, the air going through the air handler may not get cooled, meaning that the air coming into your house through the vents may feel warm. Therefore, if you have noticed that your air conditioner is blowing hot air into your house, you need to call a professional AC repair company to help you pinpoint the underlying cause of the problem and ensure that it is fixed decisively.

AC Not Kicking on When Temperatures Go Up

Your air conditioning system is supposed to automatically respond to temperature changes in your house. When the thermostat is in cooling mode, the air conditioner should kick on when temperatures go above a particular level. The AC should then automatically stop running when your preferred temperature is restored. This is meant to control how cool your house gets and also to keep your energy bills within a manageable range. Therefore, if you have noticed that your air conditioning system is not kicking on when temperatures go up, then there could be something seriously wrong. The issue can occur if the thermostat is broken or the temperature sensors have malfunctioned. But whatever the cause of the problem might be, you can count on a professional AC repair company to help with an accurate diagnosis and a decisive professional solution.

AC Losing Efficiency

Of course, considering the amount of work your air conditioning system needs to do to keep your home’s ambient temperature within a comfortable range, it is not surprising that it is one of the most significant energy consumers on its own. In summer, particularly, you expect your air conditioning system to consume a significant amount of energy. However, this does not mean that you should accept unusually high energy bills. Indeed, your air conditioner’s energy consumption should be stable and consistent from one year to the other. Therefore, if you have noticed a sudden spike in your energy bills, the AC could be running inefficiently. However, you may need an electrician to help you do an energy audit to confirm if this is the case. If it is confirmed that your AC’s energy consumption has spiked, you will need an AC repair company to help you understand why this could be happening. Some of the reasons your AC could lose efficiency include low refrigerant level, dirty coils, and leaking air ducts. But whatever the cause of the issue might be, a good AC repair expert should diagnose it accurately and come up with a practical solution for it to restore the efficiency of your AC and keep your energy bills fairly low.

A Dirty Condenser Coil

The condenser coil is found in your air conditioner’s outdoor unit. Its job is to increase the surface area for the refrigerant flowing through it to efficiently release the heat absorbed from your indoor air. Unfortunately, since this component is found outside your house, it can easily get covered with dirt, dust, and even vegetation, which might interfere with its ability to release heat as expected. Therefore, if the coil is dirty, you can expect your air conditioning system to lose its efficiency and start consuming more energy trying to work harder than necessary. Besides, your house might become less comfortable since your AC might start blowing hot air back into your house. However, cleaning this coil is not something you should do on your own since you might end up damaging it. Therefore, it is imperative for you to work with a professional AC repair company to ensure that the coil is cleaned professionally on a regular basis. Any vegetation and dirt around the outdoor unit should also be removed before it can start interfering with the performance of your air conditioning system

AC Running Constantly

When the weather is too hot, you can expect your air conditioning system to run for extended hours without stopping. However, the air conditioner should not run constantly. Once your preferred temperature level has been achieved, the AC should automatically stop running. The AC should start running automatically when your indoor temperature exceeds a particular level. Therefore, if you have noticed that your air conditioning system does not stop, there could be a legitimate reason to be concerned. This usually occurs if the thermostat is broken. But whatever its cause might be, you need to get it addressed urgently by an AC repair company since it might lead to a sharp rise in energy bills.

The Bottom Line

As you can see, many air conditioning issues can make it necessary to call an AC repair expert to your house. Some will need to be addressed urgently, and therefore, you need to have a dependable HVAC contractor on speed dial. If you are looking for a good HVAC company to help you handle any air conditioning issue you might run into, One Hour Air Conditioning & Heating of Fort Worth is an excellent choice. Feel free to contact us today for more information about our company.

See our most recent blog on this topic here.

Check out our reviews here.

Photo By tolgart at iStock

8 Things To Consider Before A Central Air Conditioner Installation

8 Things To Consider Before A Central Air Conditioner Installation

Texas summers are hot, so you need an air conditioner to keep your home cool and comfortable. If you use window air conditioners to keep your house cool, you should consider the benefits of central air conditioning.

Although window units are effective, there are several hassles you have to deal with.

  • The units must be installed at the beginning of the cooling season and removed at the end.
  • You need a place to store the units when they aren’t in use.
  • The window unit cools just one room, and the door must remain closed to prevent the cold air from escaping.
  • You have to hang a blanket or sheet over doorways when cooling a room without a door.
  • Window units are loud, and the noise can be distracting.
  • Running multiple window units consumes a significant amount of energy, resulting in expensive electric bills during the cooling season.

If you install a central air conditioner in your home, you won’t have to deal with any of these problems. When a central air conditioner is installed, it stays installed permanently, and you won’t have to deal with installation and removal every year, and you won’t need storage space. You only have to press a button to turn on the unit at the beginning of the cooling season and press it again to turn it off. Also, vents are installed in every room so that the unit will cool the entire home, and you can keep the bedroom doors open and won’t have to hang sheets or blankets over the doorway. Finally, central air conditioners are whisper quiet when running, and running a central air conditioner is cheaper than multiple window units.

If you plan to replace your window units with a central air conditioner, there are plenty of things you need to consider before it’s installed, and an AC installation tech can help.

Create a Budget

The first thing you have to do before any home improvement project is to create a budget. You have to figure out how much money you have to spend on the project to avoid paying more than you can afford. When creating a budget for an air conditioner installation, you have to include the cost of the unit, the installation fee, and the cost to install ductwork or repair the existing ductwork.

If you aren’t sure how much each of these will cost, an HVAC professional can help. They will have the knowledge and experience to come up with accurate figures so that you can create an accurate budget.

Selecting the Installation Locations

When you have an accurate budget, it’s time to select locations to install the indoor unit and the outdoor compressor. Most people install their indoor units in the basement, and you have to be sure there’s enough room for the indoor unit and for you to move around in the area you choose.

Next, you must choose a place in the yard to install the compressor. There’s more to this than simply pointing to an area in the yard. The compressor should be installed where there’s a significant amount of shade. If the sun beats down on the compressor all day, it can overheat and shut down, preventing the unit from producing cold air. You should also choose an area away from bushes and shrubs that can get caught in the compressor’s fan, causing significant damage.

If you aren’t sure if you’ve chosen the best locations for the indoor unit and the compressor, an AC installation tech can help. They can walk through your house and yard to select the best locations for the units where they’ll work the most efficiently.

Choosing the Correct Size Unit

You can’t buy the first air conditioner you find because the unit’s size is a significant factor, so you may want to contact an air conditioner installation professional to help. The size of the unit depends on your home’s square footage. If you buy a unit that’s too small for your home, it will have trouble keeping the house cool. The until will have to work harder, increasing your energy bills, and the strain will shorten the unit’s lifespan. If you buy a unit that’s too large for your home, you’ll waste a lot of money on electricity. Also, the unit will cycle more frequently than it should, preventing it from eliminating the humidity from the house.

A professional in AC installation will go by your home’s square footage to select the correct size unit for your house. They will also analyze the available space to ensure you buy an air conditioner with the correct dimensions. The last thing you want is to buy an air conditioner only to find out later that it won’t fit in the area you’ve chosen to install it.


You may be tempted to choose the cheapest unit to save money on the project, but this isn’t a good idea. Low-quality units are the cheapest and don’t last as long as high-quality ones. Also, lower-quality units experience more issues and breakdowns than high-quality units. If you choose a low-quality unit you’ll end up spending more to fix it and then to replace it sooner than you would if you had gone with a high-quality unit.

If you need help differentiating between high and low-quality units, an AC installation tech can help. They know the brands and models and can help you choose a high-quality unit that won’t cause you to exceed your budget.

Energy Consumption

You want to choose a unit that doesn’t consume a lot of energy, so you don’t have to spend a fortune to run the unit during the summer. Units that consume a lot of energy will result in high energy bills, and an AC installation tech can help you choose an energy-efficient unit.

You can determine the unit’s energy efficiency by using the energy efficiency ratio (EER). The EER rating for central air units ranges from 10 to 19, and the higher the EER rating, the more energy-efficient the unit is. Air conditioner installation techs recommend choosing a unit with an EER rating of at least 13 or 14, and you should avoid units with EER ratings lower than 11.

Units with high EER ratings will be more expensive than units with low EER ratings, but if you can make the initial investment, it will cost less to run the unit during its life.

An AC installation tech can help you select a unit with a suitable EER rating that won’t cause you to exceed your budget.


Ductwork is essential to your air conditioning system because it allows the cold air to travel from the unit to the vents throughout your home. If there was a central air conditioner in your house that has since been removed, there would likely be existing ductwork. You’ll need a licensed HVAC tech to inspect the condition of the ducts. If they haven’t been used in a while, there could be damage or an insect or rodent infestation. If there is damage to the air duct, the air conditioner installation tech can determine how much it will cost to fix the ducts so they can deliver the air to the ducts effectively.

If there has never been a central air conditioner in your house, it must be installed during the air conditioner installation. According to Home Advisor, the average cost to install ductwork is $1,179, with a range of $454 to $2,056. The installation can cost more if you have a big house and can cost up to $4,000. An AC installation tech can give you an estimate of the cost to install the ducts and how much time the installation process will add to the length of the project.

Additional Equipment

A professional in air conditioner installation can discuss the additional equipment options to help your unit perform better and make your life more convenient. The equipment you can choose from includes:

  • High-tech thermostats: There was a time when programmable thermostats were the only money-saving option. Thermostat technology has evolved over the years, and you have more options. Wi-Fi thermostats can be controlled using your smartphone from anywhere as long as you have an internet connection. You can turn on the unit or adjust the temperature from the couch using your phone, so you won’t have to get up. You can also turn up the temperature when everyone has left the house for the day, so it doesn’t have to run on full blast all day, which will help save money on your energy bills. You can turn the temperature down using your phone before heading home so your house will be cool and comfortable when you arrive.
    You can buy a smart thermostat if you have a smart device, such as Amazon Alexa or Google Nest. You can adjust the thermostat setting using the sound of your voice when you’re home, and you can use the smart device’s app to change it when you aren’t home.
    An air conditioner installation tech can go over the pros and cons of both options so that you can choose the best thermostat for your home.
  • Air purifier: Your windows must remain closed during the summer to keep the treated air in and the hot air out, causing you to breathe the same air circulated repeatedly. If you’re worried about your home’s air quality, an air conditioner installation tech can install an air purifier to ensure your family breathes in healthy, clean air.
  • UV lamp: Mold can grow in your air conditioner, often due to a lack of maintenance. This is a serious problem because the mold can cause spores to circulate in the air when the unit runs, putting you and your family at risk for mold-related health problems, such as allergies, chronic headaches, skin rashes, respiratory issues, and a weakened immune system. If an HVAC tech cannot eliminate every mold spore, the unit must be replaced to ensure your family remains healthy.
    An air conditioner installation tech can install a UV lamp in the unit that will prevent mold and bacteria growth in the unit.

It’s best to have the additional equipment installed at the same time as the air conditioner to avoid paying for a service call later.


Your air conditioner must be maintained by a professional every year before the heating season begins. Routine maintenance will ensure the unit functions correctly all summer. The tech will give the unit a tune-up to keep it running, and they can detect minor issues so they can be fixed before escalating to something more serious. You should also have the air ducts cleaned by a professional every three to five years to prevent the ducts from getting clogged, which can restrict the airflow from the vents.

Neglecting to have the unit and the ducts maintained regularly can result in problems that must be repaired and can decrease the unit’s lifespan.

Call One Hour Air Conditioning & Heating of Fort Worth

If you plan to install a central air conditioner in your house and need to hire an AC installation tech, look no further than One Hour Air Conditioning & Heating of Fort Worth. We’re a full-service HVAC company, serving customers in the area since 1988, and many of our customers have been working with us for over three decades.

Our licensed HVAC techs are professionally trained and have the knowledge and skill to handle HVAC installations, maintenance, and repair. HVAC technology constantly evolves, so our techs receive ongoing training to ensure they can work with the latest HVAC models.

We understand that HVAC problems can arise at the worst times, so we provide emergency service 24 hours a day, 365 days a year. If you have an HVAC problem that affects your home’s temperature or puts your home and family at risk, we’ll get a tech to your house quickly to resolve the problem.

If you need an appointment to install a central air conditioner in your home, give One Hour Air Conditioning & Heating of Fort Worth a call today.

See our most recent blog on this topic here.

Photo By MicroStockHub at iStock

Minor But Crucial Components Likely To Be Forgotten During Duct Cleaning Service

Minor But Crucial Components Likely To Be Forgotten During Duct Cleaning Service

Duct cleaning is essential for maintaining a healthy and comfortable indoor environment in your home or workplace. During the process, focus is usually placed on the major components like air ducts and vents. Getting rid of dust, dirt, and debris that have built up in their duct systems is often the primary goal. While that’s a great start, there are minor but crucial components commonly forgotten during the service. Properly cleaning these components requires attention to detail and expertise, so entrusting the job to a professional duct cleaning company is essential. This blog post will explore several minor components often overlooked during duct cleaning service and why they’re so crucial.

Registers and Grills

Registers and grills are the final components of your duct system that control and regulate how air flows from your HVAC system into your home. Registers are used for supply ducts, and grills are used for return ducts. They are strategically located around your home and are responsible for maintaining proper air circulation in each room. When your HVAC system is on, registers and grills help direct air to the right places, and when it’s off, they keep debris and air from flowing in and out of your ducts.

Several issues can arise if you neglect to clean and maintain registers and grills during your duct cleaning service. These components are susceptible to dust, dirt, and debris buildup, which can clog them and prevent airflow. This leads to decreased system efficiency, higher energy bills, and poor indoor air quality. In severe cases, clogged registers and grills can also cause HVAC system breakdowns and lead to costly repairs.

Registers and grills are also important for maintaining the aesthetic appearance of a room. Dirty registers and grills can be unsightly and detract from a room’s overall appearance. Cleaning them can help improve a room’s appearance and make it more inviting.

Blower Motor and Wheel

The blower motor and wheel are located inside your HVAC system and work together to circulate air throughout your home. The blower motor is responsible for starting and stopping the blower fan, while the blower wheel works to move air through the ducts and vents. Over time, these components can become clogged with dirt, dust, and debris, causing reduced system efficiency and poor indoor air quality.

Cleaning the blower motor and wheel can help to eliminate dirt, grime, and debris that may cause friction, leading to increased wear and tear. When these components suffer from reduced airflow, they become bereft of lubrication, which increases the chances of overheating or seizing up. A dirty blower wheel may lose its balance, causing it to vibrate excessively, harming other parts of the HVAC system. By cleaning these components, you can mitigate this risk of damage, avoid costly repairs, and prolong the lifespan of your HVAC system.

Heat Exchanger

Heat exchangers transfer heat from one fluid to another within your HVAC system. In other words, they help regulate the temperature inside your home by transferring warm air from the furnace to the ductwork. If they become dirty or clogged with debris, they won’t be able to function as efficiently, leading to higher energy bills, decreased comfort, and even safety hazards. For example, a dirty heat exchanger can cause your furnace to overheat, leading to a fire.

Cleaning a heat exchanger requires specialized tools and equipment that many duct cleaning service companies don’t have. As a result, they may skip over this critical step altogether, leaving you with a partially cleaned system and potentially dangerous conditions. Proper heat exchanger cleaning involves using high-pressure air and specialized brushes to dislodge debris and contaminants, then vacuuming them away to ensure the heat exchanger is clean and ready to function at optimal levels.

It’s not just about cleaning the heat exchanger, however. Inspecting it regularly for signs of wear and damage is also crucial. Over time, heat exchangers can develop cracks, rust, and other damage that can compromise their function and safety. By inspecting your heat exchanger during each duct cleaning service. You can ensure it’s in good working condition and address any potential issues before they become major problems.

Condensate Drain Pan

The condensate drain pan is a simple component located beneath your HVAC system’s evaporator coil. Its sole purpose is to collect moisture from the evaporator coil and drain it from the system through a pipe. While it may seem insignificant, it is vital in ensuring a properly functioning HVAC system. If not cleaned regularly, it can become blocked with debris and algae growth, leading to blockages that impede water flow and compromise the system.

When the condensate drain pan gets clogged, water can overflow and create moisture problems. The standing water in the pan can cause mold and bacteria growth, leading to unpleasant odors, respiratory issues, and allergic reactions. Moreover, overflowing water can cause structural damage to your home or building, leading to costly repairs. The damage may not be immediately apparent, and it might have already caused severe damage by the time it is noticed.

An improperly functioning condensate drain pan can also lead to high humidity levels, damaging your possessions and electronics and affecting the comfort of your living space. Excess moisture in the air can cause paint to peel and wallpaper to bubble, leading to unsightly and costly repairs. High humidity levels can also compromise your HVAC system, leading to increased energy bills and the need for premature replacements.

To avoid these adverse outcomes, it is essential to have your condensate drain pan inspected and cleaned during your HVAC maintenance appointment. The EPA recommends cleaning the condensate drain line and pan at least once a year. Professional HVAC technicians have the necessary equipment, knowledge, and expertise to inspect and clean this crucial component, ensuring your HVAC system functions correctly and keeping your home or building free of moisture problems.

Return and Supply Plenum

The return plenum is a large sheet metal box that connects the return ducts to the HVAC system. It is the point at which the air mixes and its temperature is adjusted. Meanwhile, the supply plenum is the air distribution hub. It’s where the conditioned air exits the HVAC system and moves into the ductwork to circulate throughout your home. Proper maintenance of these plenums is essential to ensure that the system runs smoothly and indoor air quality is maintained.

One of the primary reasons why both return and supply plenums need to be cleaned is that they can accumulate dirt, dust, or other debris over time. For instance, because the return plenum is where the air gets sucked in, it can collect environmental pollutants, such as pet hair, allergens, and dust. If these particles accumulate, they can affect the airflow and cause your HVAC system to work harder than it should, leading to higher energy bills. Cleaning the return plenums regularly and removing dust buildup can ensure proper airflow and prevent costly repair issues.

Similarly, the supply plenum can also be subject to dirt buildup. If the system has gone without cleaning for too long, this buildup can reduce the air entering the ducts. That, in turn, reduces the amount of airflow into the other rooms, resulting in poor indoor air quality and decreased comfort levels. Regular cleaning of the supply plenum can improve the ventilation in your home and ensure proper air distribution.

Air Handler

Your air handler is responsible for circulating the air throughout your home, which means that it accumulates dust, pollen, and debris over time. During duct cleaning, it’s essential to clean the air handler, too, since dirty components can spread pollutants back into your freshly cleaned ducts. Moreover, since the air handler is typically enclosed, it’s often less visible than the rest of the system, so it’s easy to forget about it during duct cleaning.

Neglecting your air handler during duct cleaning service can also lead to malfunctions and breakdowns. If your air handler accumulates too much dirt and debris, it can lead to clogging and reduced airflow, which may cause your HVAC system to work harder and increase energy bills. Similarly, dirty air handlers can cause issues with humidity since it affects the system’s ability to regulate moisture levels in your home. By cleaning your air handler during duct cleaning service, you can ensure it runs smoothly and efficiently.

Another reason why people tend to overlook their air handler during duct cleaning service is that it’s usually located in hard-to-reach places, such as attics or crawl spaces. This lack of accessibility means that unless you specifically ask for it to be cleaned, it’s likely to be neglected during routine cleaning. However, there are professional HVAC technicians who have the right tools and expertise to access these difficult locations, making it easier to clean your air handler.

Reasons Why Inspection is Important After Duct Cleaning

As crucial as duct cleaning is, don’t forget to inspect them afterward. Inspection is equally important as cleaning because it can uncover underlying issues that may need immediate attention. Here are a few reasons why an inspection after duct cleaning is so important:

Verification of Job Completion

The primary reason for inspection after cleaning is to verify that the job has been completed per the contract. Inspection after duct cleaning service ensures that the job is thorough and all crucial tasks have been carried out. These tasks include thoroughly cleaning all ductwork, completing the proper sanitization and deodorization of the ducts, and replacing or cleaning the air filters. Verification of job completion can be achieved through visual inspection of the ductwork by the technician or by using cameras to capture footage of the ducts before and after cleaning. This will ensure that the job is completed effectively and that your air quality is improved.

Identify Any Potential Issue

The inspection entails more than just a quick look at your ducts. It typically involves reviewing everything that makes your HVAC system work. In most cases, a trained and experienced technician will identify any potential issue that may turn into something significant. You might be able to prevent system breakdowns or even costly repairs in the future if you address the problem in time.

Quality Assurance

The verification process ensures that the cleaning has been done correctly. It would be nice to take a service provider’s word that the job is done, but reality begs to differ. Verifying job completion will give you peace of mind that you have received value for your money and that the work has been done right.

Improved System Performance

Verification includes proper airflow checks, which detect any subsequent issues in the installation process, including blockages, poorly connected ducts, and other defects. Verifying job completion can help identify these issues early, thereby preventing malfunctions or system failures.

Breathe Fresh Air with Our Reliable Duct Cleaning

It’s essential to have your duct system cleaned regularly to maintain a healthy and comfortable indoor environment. However, properly cleaning minor yet crucial components is often overlooked, reducing system efficiency and indoor air quality. Entrusting the job to a professional duct cleaning service company ensures that these components are inspected and cleaned, ensuring your system functions optimally. Don’t overlook these key components during your next duct cleaning. You should also have a professional inspect your system after the cleaning to guarantee that it has been completed properly and that no underlying issues remain.

Hire Us for Duct Cleaning and Other AC Services

Are you looking for a reliable company to handle duct cleaning and other AC services? One Hour Air Conditioning & Heating of Fort Worth is at your service. We can help you maintain the cleanliness of your ducts and ensure that your AC system is running at its peak performance. We are dedicated to providing excellent services, including duct cleaning, installation, inspection, and maintenance. Our team is composed of certified technicians with extensive experience in HVAC systems. Reach out today for more information about our services.

See our most recent blog on this topic here.

Photo By Makhbubakhon Ismatova at iStock