Most Frequently Asked Questions about Heating and AC in Fort Worth, TX
A Heating and AC system is a must-have for houses in Fort Worth, TX. It works to keep your house warm and cozy in winters and allows you to enjoy the cool air of air conditioning unit in the blistering heat of summer.
This makes a heating and AC system an important part of your house. However, most people know very little about this equipment and when something goes wrong with it, they are often left clueless. Luckily, it does not have to be like this anymore!
This article will guide you about all you need to know about heating and AC system for your house in Fort Worth, TX. Scroll down to find answers to some of the most commonly asked questions about heating and AC systems.
What is heating capacity?
Whether you are buying a heating system, an air conditioner or an HVAC system, make sure it is suitable for your house. The first thing you should check while buying a new heating system is the heating capacity. It helps to make sure you buy the “right sized” system for your home. Keep in mind that investing in a system that is not size-appropriate for your space is one of the most common mistakes.
The heating capacity of a heating system is usually measured in the British thermal unit, which is more commonly known as BTU. BTU shows two types of reading, the input capacity, and the output capacity. It is important to understand that the input capacity measures the amount of gas or fuel that is burned to produce heat that keeps your house warm.
On the other hand, the output capacity is the measure of heat that is produced. In other words, input capacity gives you a general idea about how much gas or fuel your system will consume while the output capacity indicates the amount of heat that is generated by your HVAC system.
Try to look for heating and AC systems having higher output capacity and low input capacity, indicating that your system will consume less gas to produce more heat!
What is cooling capacity?
Just like the heating capacity of the heater, it is important to check the cooling capacity of the air conditioner of your heating and AC system. Cooling capacity basically indicates how powerful your air conditioning system is. Just like we use “horsepower” to describe the competence of cars, we employ “cooling capacity” to indicate the working capabilities of air conditioners.
Cooling capacity is measured in Tons. It is important to realize that 1 ton is equal to 12,000 BTUh (British thermal units per hour). This means, the higher the number of Tons, the greater will be the cooling capacity of your air conditioning unit.
It is advisable to look for a system that is suitable for your space and provides just the right amount of cooling. Investing in an air conditioning system that is too large for your house can make your space unreasonably cold. On the other hand, a system that is too small will not produce sufficient cool air.
How can I choose the right size and type of heating and AC system for my house in Fort Worth, TX?
The importance of choosing the rightly sized heating and AC system cannot be emphasized enough. The easiest way to make sure you make the best choice for your house is to seek help from your contractor or an HVAC expert. An expert can help you determine the right size of the system.
Most heating and AC contractor will be happy to visit your house to inspect it and help you make the right decision. In some cases, the consultation is free of cost! It is advisable to let the experts help you out but make sure that they don’t suggest a heating and AC system solely based on the sq. ft. area of your house. Also, keep in mind that it is not always a good idea to replace an existing heating and AC system with a similarly sized one.
How do I know when I need a new heating and AC system?
Heating and AC systems are made to last but like everything else, there comes a time when you have no choice but to change them. The average lifespan of a regularly maintained heating and AC system is around 10 – 15 years.
Let’s have a look at some telltale signs that indicate it’s time to consider replacing your HVAC system.
- If your energy bill is unreasonably high, it is probably due to the decreased working capacity of your heating and AC The working capacity of HVAC systems diminishes over time and they start working double time to generate the same amount of heat or cold air. This leads to high energy bills.
- Excess noise produced by the heating and AC system is another sign of faulty parts. If your system is producing strange noises, it is advisable to get it inspected and if required, invest in a new one.
- If you think your current heating and AC system is unable to sufficiently cool or heat the house, its’ time to get a new one.
What are the different types of heating and AC Systems?
A number of different types of heating and AC systems are readily available in the market. In order to make a wise and informed decision, it is important to know and understand all your options. Here’s a list of some of the most popular types of HVAC systems that you can easily purchase for your house in Fort Worth, TX.
- Geothermal Heat Pumps
- Heating Pump & Gas or Oil Furnace Split Systems
- Mini Split Heat Pumps
- The hybrid dual fuel system
- The spilt HVAC
- Boiler & Radiant Heat System & Air Conditioner
- Standard Central Air Conditioners & Furnace Split System
- Ductless HVAC unit
- Heating and AC package units
Buying a new heating or AC system can easily get overwhelming. Plus, it is a big investment. Therefore, it is important to contact only the most trusted heating and AC experts of Fort Worth, TX like One Hour Heating and Air to get the best HVAC systems and services.