Types of Fuel Available for Heating and AC | Fort Worth, TX

Types of Fuel Available for Heating and AC | Fort Worth, TX

If you have a heating and AC unit then you might already know the type of fuel that it uses. But if you’re looking into a different unit you might be considering a different option. Maybe you’re thinking about some of the different types of fuel that you might need for an entirely new system. Well, we’re going to talk about some of the different types of fuel and just what you need to know about each one so you can make the best possible choice for your next system.

Natural Gas

One of the first things that you’re going to find with a heating and AC system is a natural gas option. This is one that’s simple enough to use and it doesn’t have any susceptibility to the electricity in and around your home. You’ll find that as many as 60% of American households actually use this type of energy to power their heating system. So, that makes it a relatively common and useful option. It can be relatively efficient and it’s going to use a traditional blower motor and air ducts that help to release the air throughout your home.

If you have a heating and AC system that runs off of natural gas there are actually several different ways that this can work. These systems might run off propane, for example, which is dependent upon regular deliveries. You can also choose from systems that run off heating oil and other forms of gases and oils. You get to decide what type of system is going to be the best one for you and which is going to be most efficient. Keep in mind the overall cost as well as the maintenance that needs to be done in order to keep the system running for an extended period.

Electric Heaters

There are some heating and AC systems that actually run throughout your entire house with electricity. These systems can be clean to run and they can be relatively energy efficient. Even still, electricity isn’t always the most efficient when it comes to heating and you could find yourself with a little bit higher bill than if you decided to opt for natural gas methods. Still, it’s all about weighing out the benefits and the drawbacks and deciding which method is going to be the most effective and efficient for your home.

Boiler

A boiler isn’t really a heating and AC system but just a heating system instead. Even still, it’s going to boil water to help you get the heat that you’re looking for throughout your home. It turns this hot water into steam and that steam is released into the radiators throughout the home. The steam then turns into heat that releases through the radiators. That’s how you can warm up the space. It’s relatively efficient and it can be quite inexpensive in many ways. Not to mention it’s pretty clean to operate, but the system can break down over time.

These systems are more commonly found in older homes though there are some slightly more modern homes that still use them. Because they’re not quite as efficient as newer systems and because the newer systems also take up less space the boiler idea is generally not the way that you want to go. You’re going to find yourself with a whole lot better features if you decide to go with an all-in-one system that combines the heating that you’re looking for along with the cooling that you’re going to need in the warmer months of the year.

Electric Space Heaters

Again, this is an individual system that doesn’t really provide you with heating and AC. Instead, it only provides you with the heat that you’re looking for but it can be good if you’re experiencing cold spots in your home. A space heater gives you just a small amount of heat and it does so in a smaller general area. You’ll be able to keep yourself a whole lot more comfortable without inconveniencing anyone else who happens to be near you and is a little bit too warm.

These heaters just plug into the wall and they can be quite inexpensive. But you’re going to have a lot of expense in keeping them running. That’s because these heaters run off your electricity. For every minute that you’re using it and keeping it plugged in it’s going to be charging you even more on your electric bill. If you use them frequently you’re definitely going to notice a change in your expenses and you’re definitely not going to be happy about the outcome. That’s why a traditional heating and AC system is the better way to go.

Talking with a professional is generally going to be the best way for you to decide on the right heating and AC system for your Fort Worth, TX home. Make sure you’re choosing something that you can be comfortable using and that’s actually going to work throughout your entire house. After all, the point of having one of these systems is to be able to use it the way that you want and if it’s not going to heat or cool the entire house then it’s definitely not going to be worth the money that you’re going to spend on it.

Choosing a quality professional to help you in deciding on the right system is most definitely a crucial piece of the puzzle as well. You want to be sure that you have someone who is going to guide you in the right direction and make sure that you’re not spending money on a system that isn’t going to work for your Fort Worth, TX home. It doesn’t take much to find the ideal system. It just takes someone who is going to be dedicated and who is willing to put in the time and the effort as well as the research to get it all done. Are you ready to get started choosing your heating and AC system? Contact One Hour Heating and Air Conditioning for all of your HVAC needs!