8 Reasons Why Your Air Conditioner May Not Be Cooling| Air Conditioning Service in Fort Worth, TX

8 Reasons Why Your Air Conditioner May Not Be Cooling| Air Conditioning Service in Fort Worth, TX

Is your AC not throwing cool air even when it’s newly installed and you’ve invested a huge amount over it? Could it be that the system is clogged or has suffered an internal mechanical damage?

If so, call up your nearest supplier for air-conditioning service in Fort Worth, TX. And while you do that, take a look at the following issues that are preventing your unit from throwing cool air.

1.   A Refrigerant Leak

A refrigerant leak may cause your AC to stop cooling completely. Refrigerants are the real components that circulate cool air all around your unit. Normally, the level of the refrigerant stays the same, no matter how many years it has been to your unit.

But when a leak erupts, the refrigerant levels drop instantly and so does the cooling temperatures of your room. Some signs to quickly detect a leak are hissing sounds from the unit, a significant decrease in cooling performance, and an icy buildup around the unit.

If you notice any of these symptoms, call up an air conditioning service provider in Fort Worth, TX for a check-up.

2.   Your AC Wasn’t Correctly Installed to Begin With

Many people end up ignoring this issue but it could be that the initial installation of both your AC and furnace may have been faulty to begin with. You’ll know this if it runs down a few weeks after being newly installed or when you’re making frequent trips to an air conditioning service provider in Fort Worth, TX even when you spent a thousand bucks on the AC.

For second opinions and recommendations, always take some time from your supplier to make sure that the unit is installed properly. And if not, then do some research and get in touch with a credible air conditioning service in Fort Worth, TX for correct installation.

3.   Your Thermostat May Need to be Replaced

If your ductwork has developed any spaces or cracks in it, it would not be able to trap the cool air and let it disappear into the atmosphere heat. The cool air not reaching you may cause you to think the AC isn’t cooling, but in fact the cracks in a ductwork may have stopped it from sealing the air in your room.

This can be really frustrating and may be costly to repair if you delay the problem. Hence, as you detect poor unit performance, get it checked by an air conditioning service provider in Fort Worth, TX as soon as possible to avoid any issues with the ductwork.

4.   The Breaker Tripped

This suggestion is for those people whose AC unit is completely out of function. The breaker tripping due to power overload means that there is no electricity reaching your unit anymore. Of course, every appliance works with electricity, so this would mean that your AC won’t give cool air anymore.

You can open up the main breaker panel and check whether the said breaker has tripped. If yes, try switching it on again to reset the electricity. If it doesn’t make a difference, then the fault is much deeper here for which you need to call someone for air conditioning service in Fort Worth, TX.

5.   The Unit is Clogged with Debris

The most common damage to your AC is always due to dirt collecting either inside the filters or outside the unit. Dirt can comprise debris, such as leaves, twigs, and tree branches that accumulate right outside the big pipe that is supposed to expel moisture.

The big pipe known as the AC condenser is exposed to all kinds of plants and insects, especially in cases of heavy rain and wind. The compressor won’t be able to exchange heat efficiently because of the excess of dirt at its end.

For a start, you can clean up the space covering the end of the compressor to keep branches, vegetations, and bushes away from the unit. And get it washed once a month. If you’re unable to make time for these things, hire someone for air conditioning service in Fort Worth, TX to offer you cleaning services.

6.   Faulty Wiring

You’ll be surprised at how drastically faulty wiring can increase your electricity bills. As for the AC, uncertified, torn off, and haphazard wiring should never be taken lightly. Not only is it stopping your unit from delivering cold air into the room but can potentially lead to a fire incident if it becomes too hot.

Bad wiring can also cause the circuit breaker to trip and shut down the entire system from getting electric power. Hence, it is important to get regular checkups of your wirings, especially the ones buried under heavy carpets and get them replaced if a fault is detected or if your room isn’t cooling properly.

You can do so by getting in touch with a company who will provide you air conditioning service in Fort Worth, TX.

7.   Frozen Coils

A frozen coil is a subsequent result of all the other problems in your AC. Clogged air filters, debris collecting outside, obstructed ductwork, and faulty thermostats are all the reasons that can potentially freeze up the coils due to lack of proper transfer of heat.

Even low refrigerants could be a cause. Nonetheless, if you’re having trouble in detecting this fault in your unit then it’s better to take it for a check up to a well-known and trusted air conditioning service in Fort Worth, TX.

8.   External Fan Not Functioning Properly

It is crucial for the fan situated on the outside of your unit to work properly otherwise it can’t throw in cool air inside. Heat will not be able to properly transfer inside and that can wreck the cooling mechanism of your AC.

Due to lack of sufficient heat owing to the outside not working properly, the AC compressor begins to overheat to a point where the unit is almost burning. Therefore, it goes into safety overload and trips. That’s the least worst thing, because if the heat causes internal damage then you’d have to get your unit replaced by an air conditioning service in Fort Worth, TX.

For professional services and a complete technical check-up of your AC unit, contact here.