Winter can be full of excitement with all the holidays and events aligned one after another. Amidst joys, celebrations and new beginnings, the last thing you want is returning home to a malfunctioning heating and ac in Plano, TX. What could be worse is waking up shivering in the middle of the night only because your furnace has encountered some unknown issue.
The furnace is an important part of heating and ac in Plano, TX and you need to give it due to attention to make sure that you do not face any unpleasant incidents unexpectedly. Furnaces can be complex machines and they can problematic for a number of reasons. If your furnace is not working, it means that the heat is not flowing. Your furnace can break down for a number of reasons. We have accumulated six common furnace problems that can lead towards breakdown.
1. Aging Furnace
This is one of the important reasons for your furnace to work inappropriately or break down completely. The system of heating and ac in Plano, TX needs to maintained and upgraded timely if you want to avoid any unnecessary problems with the furnace. As a matter of fact, the furnace is just like any other machine which will work efficiently if you maintain it effectively. But if your furnace is aging and you are still using it, there is a high chance that it won’t be able to sustain the burden and stop working. So, if you have an old system of heating and ac in Plano, TX and your furnace’s age is closing to fifteen years or has already crossed it, it is about time you consider replacing it.
2. Reduced Air Flow
Nobody wants to enter into a somber home on a chilly winter evening. Well, if you do not have a quality functioning furnace, this is what you will get. If you are facing obstructed air flow from the furnace, it is likely because there is something that is interrupting the air. This could be the clogged filters that are decreasing the efficiency of the unit. Filters are an important part of heating and ac in Plano, TX. If you want your system to function proficiently, you have to make sure that the filters in the unit are timely cleaned. If not, they will ultimately increase the burden on the unit and insufficient air will pass through the furnace. Subsequently, you won’t be able to get the desired temperature.
3. Malfunctioning Thermostat
The air that flows through your furnace and the temperature it sustains in the room is controlled through the thermostat. If you have recently cleared the dirt and debris from the filters and your furnace isn’t that old, it has to be the thermostat causing the problem. The thermostat in your heating and ac in Plano, TX can incur damage because of its wiring. It can come loose at any time and cause shorts to occur. This damage the sensors placed in the furnace, resulting in malfunctioning of the entire unit. If you see that the furnace is tripping more often and keeps on switching on and off, or the thermostat is giving readings it shouldn’t, it means the sensors in the furnace have incurred damage. You need to get a professional HVAC repairing service to replace the thermostat and resume your furnace’s functioning.
4. Rusting Pilot
The units of heating and ac in Plano, TX can be expensive. They sure aren’t an investment that you can make often. To save yourself from huge damages and extensive repairs, it is important that you keep up with regular maintenance of the system. Rusting is a natural process and can occur often in the igniters of pilots of the furnaces. If you see that your furnace keeps on getting switched off, make sure to see if the igniters in the furnace room are rusting. They can come loose and blow out the pilot lights, making it difficult for you to light again. So, this could be one reason for furnace problems.
5. Clogged Gas System
If the gas system itself isn’t sending enough gas, you won’t receive much from the furnace. This could be due to a number of reasons. Firstly, it can be the leaks in the gas pipelines causing the gas to escape out instead of reaching the furnace. Secondly, there can be dirt in the hose that can block the passage of gas through the system to the furnace, resulting in reduced supply. It is important to have your gas system checked well by the professionals of heating and ac in Plano, TX to make sure you do not face any problem across the season.
6. No Heat Regulation
The purpose of the furnace in the unit of heating and ac in Plano, TX is to produce heat to keep the space warm. If it is only giving out air and no heat, this means something is wrong with the unit. This can be a small problem and you need to just to turn off the fan setting to make sure that the furnace does not let simple air pass by instead of heating the room. Another reason could be reduced fuel levels of the system. If this is not the problem, you will need to get the unit thoroughly checked by the professionals so that they can identify the exact problem.
A malfunctioning furnace can be highly daunting especially in the middle of the winter season. It is important that you take timely measures to ensure its efficiency throughout the season. One Hour Air Conditioning and Heating can offer you the best service for heating and ac in Plano, TX. With our skilled and experienced team, we are available 24/7 for all sorts of HVAC service that you require. So, give us a call now and have all your queries answered.