What Happens During Duct Cleaning Service? | Fort Worth, TX
Photo By -Oxford- at istock
The ductwork in your heating or air conditioning system has a very important function. It transports air to and from your system so that your house is at your desired temperature. Your house is dirty even if you clean it often. Dust can enter your home in different ways and it settles on the furniture, floors, and countertops. Once the air around it has been disturbed the dust will become airborne and this s can travel into your ductwork. This generally happens over a period of time and it requires a professional to remove the dirt and debris from your home. One Hour Air Conditioning & Heating in Fort Worth, TX provides excellent duct cleaning services that will leave your ducts squeaky clean. You might be wondering what happens during duct cleaning services and it is not a very complicated process. One Hour Air Conditioning & Heating in Fort Worth, TX would like to tell you about what happens during duct cleaning services but would also like to remind you that it is best to leave these services to a professional.
Step 1: Inspection
The first thing that happens during duct cleaning services is the inspection. A technician will have a look at your ductworks to see what the layout is like and how dirty the ducts are. This also gives you the opportunity to see in what condition your ducts are before the cleaning starts so that you can be 100% sure that the cleaning happened. Technicians will also have cameras that allow you to see further into the ducts. Another reason why inspecting the ducts prior to cleaning is to make sure that there are no leaks or damages. If there are, then the duct cleaning service provider can show you proof of the damages and advise you how it can be repaired. The technicians should also be able to conduct repairs and replace parts of the ductwork if it is necessary. They will also be able to give you an estimate of how long it will take to clean out your ducts so that you can get on with your day and not wait around for them. That is why it is important to hire a comprehensive air conditioning or heating professional. Duct cleaning can take up to five hours if the system is large and complex and you have better things to do than figure out how to clean ducts.
Step 2: Hook Up the Vacuum
The ducts can be extensive and there could be a large amount of surface area to clean thus it is more effective to section off areas. The vacuum might not have enough power to suck out the dust from the entire ductwork system. Zone bags will be used to divide the ducts into more manageable parts. Once the ducts have been divided then the vacuum which is mounted on a truck can be connected to the ducts. There are two systems of ducts in your air conditioning or heating system. The one system is a passage for the treated air to travel into your home. The other system returns the air to the center of the unit so it can be treated again. The vacuum needs to be connected to both systems. The technician will cut an access hole in the duct close to the air handler. After that, they will insert the hose and seal it as best they can. The vacuum should only suck out the debris from the ducts thus the duct cleaning service provider will seal the registers with a cover. The vacuum might be strong but it will still be ineffective if the registers are not covered. Not every homeowner has a high-powered vacuum that they can use to suck out the dust from their ductwork and that is why it is best to hire a professional duct cleaning service provider because they have all the tools and equipment to remove the dirt. They have also been trained to do it correctly so that your system is not compromised.
Step 3: Create Negative Pressure
Once the vacuum has been connected to ducts, the technicians can turn on the vacuum. Since the registers are blocked, the vacuum will create negative pressure that will loosen the dust and dirt. The dust will be sucked into a collection bin. The negative pressure is greatly effective when it is used by a qualified technician. This will ensure that your ducts are cleaned properly without any damages to the ducts. Some of the benefits of using negative pressure to clean ducts are that it will break loose the contaminants and suck up the contaminants so that they do not travel around your house anymore. This will improve air quality since no contaminant will be able to escape the negative pressure. Another benefit is that it is easy to access the ducts and use negative pressure. If you hire a trained duct cleaning service provider, you will not even notice the holes they have patched up after the cleaning. It takes a powerful vacuum and the required training and experience to clean ducts correctly without any damages thus it is also best to leave duct cleaning to the professionals. Once the system is under negative pressure the professional will remove the covers from each register. They will then clean the ducts one at a time. The service provider has to spend quite a lot of time cleaning each duct to ensure that all the dirt has been removed. A quick burst of compressed air will not do the trick. Usually, negative pressure is not enough to remove all of the dust, and sometimes a bit of intervention is needed.
Step 4: Agitate the Dust
It is necessary to use other devices that agitate the dust and continents so that the negative pressure can suck them out successfully. Duct cleaning service providers can use a variety of devices and tools to disturb the dirt and debris. They can use brushes, air whips, and compressed air. It takes a trained professional like the duct cleaning service providers at One Hour Air Conditioning & Heating in Fort Worth, TX to use the tools correctly. If they are used incorrectly then your ducts could be damaged which will lead to expensive repairs. The technicians will disturb the dust in one duct and suck it up before dislodging dust in the next duct. If the ducts have not been cleaned in a long time then the dust might be more difficult to remove as it sticks to the surface of the ducts. It is important not to use too much pressure when dislodging the dust as it could damage the ducts, causing them to leak. Your system will not function as effectively because the treated air will be lost in your walls.
Step 5: Repeat on the Other Side
Your air conditioning or heating system has two sets of ducts and they need to be cleaned separately. Once the supply side has been clean, the vacuum needs to be hooked up to a duct in the return side. The technician will cut a hole in the duct, insert the nozzle of the vacuum, and seal it up. They will connect the collection device so that once the vacuum is turned on, the dirt will be collected. As mentioned in step four, they will use brushes, air whips, or compressed air to remove the dust and debris from the return duct. It is important to clean both sides of the ductwork carefully to improve the air quality and the efficiency of the system. It can be quite time-consuming to clean out the ducts but it would take you a lot longer if you have never cleaned ducts before therefore it is best to leave the duct cleaning services to the professionals. Once the dust and debris have been successfully removed it is on to the next step.
Step 6: Sanitize the Ducts
After all the dirt has been removed, it is time to sanitize and sterilize the ducts. This is a very important step because it kills any bacteria or contaminants like mold that might have lived in your ducts. It will also get rid of allergens that might be making your family sick. This will help your ducts to stay cleaner for longer and you will definitely notice an improvement in the air quality. It is important to hire a professional duct cleaning service provider because they know how to sterilize your ducts. They will also know which products to use that are not harmful to your health but they still get the job done. It is also important to choose products that do not have an overpowering smell so that when the system is turned on, the house doesn’t smell like cleaning supplies.
Step 7: Clean the Rest of the System
Once the ducts have been cleaned and sanitized then the duct cleaning service provider will clean the rest of the heating or air conditioning system. They will clean different parts like the blower motor, drain pan, evaporator coil. The technicians will also clean out the air filters and replace them if it is necessary which will increase the life expectancy of your air conditioning or heating system. The access holes will also be closed up once the cleaning has been finished. It is best to seal the holes with sheet metal so that no leaks can occur and so that it is easy to access the ducts in the future. You should never attempt to clean any of your system’s components by yourself as you could damage them or not remove the dust completely. The technicians will use chemicals that are most effective at cleaning the different components in our system without compromising the integrity of our system. They will also be able to clean the hard to reach places as they will have the proper equipment to do it.
Step 8: Final Inspection
Once the ducts have been cleaned and all the holes have been filled up then a final inspection will occur. The duct cleaning service provider will inspect the ducts one last time to make sure that everything is clean and that there are no damages to the ductwork. You can look at the ducts with a professional to ensure that the job has been done to your satisfaction. The technician will also improve you when the best time for your next duct cleaning. The process of cleaning air conditioning ducts might sound simple but it is more complicated than you think and it is easy to damage your ducts if you don’t know what you are doing. If you have hired a reliable technician then they will not have a problem if you sit in on the final inspection. If you have any questions then you should ask the duct cleaning service provider so that you can be rest assured that everything in your system is clean and working properly.
Now that you have gained some insight regarding the process of duct cleaning services, it is clear that this process might sound easy on paper but to conduct the cleaning takes experience and skills. A professional will be able to carry out these eight steps without causing you any inconveniences. After a technician has followed the above mentioned steps you will have clean ducts and your heating or air condition system will work more effectively. If you think you are in need of duct cleaning services then contact One Hour Air Conditioning & Heating in Fort Worth, TX. They provide excellent duct cleaning services as well as a wide range of other heating or air conditioning services that might come in handy in the future.
Call One Hour Air Conditioning & Heating today on 817-835-6016 to schedule your appointment.