Photo By Sunti at Shuttertsock
When the outdoor temperatures soar, it is the air conditioner that gives you some much-needed comfort. Air conditioner problems are the worst. When the air conditioner fails to work efficiently, you not only feel frustrated but irritated and exhausted, too.
The high temperatures can drain you of your energy and make you feel lethargic. It is important that the temperature of your house is maintained at a comfortable level so that you can go on with your routine activities without being absolutely drenched in sweat.
An air conditioner is an electronic appliance, and like all other such appliances, there can be numerous air conditioner problems that can affect its efficiency. An air conditioner has numerous components, and each one performs a separate function. When there is a problem with any part, the efficiency of the air conditioner is affected. These problems need professional attention and make getting airconditioning service in the Dallas, TX area a necessity.
1. Low Refrigerant
Refrigerant is the substance that an air conditioner uses to carry the heat from the air and lower the temperature of an indoor setting. However, this refrigerant may leak from the refrigerant lines, affecting the ability of the air conditioner to remove heat from the air. This means that the air conditioner fails to deliver the cooling it is supposed to provide. This is one of the most common causes of air conditioner problems.
If your air conditioner is not working efficiently, you need to call a professional air conditioning service to get the problem fixed and restore the efficiency of your appliance.
2. Frozen Evaporator Coils
While the refrigerant is responsible for carrying the heat from air away, the evaporator coil is responsible for absorbing this heat like a sponge. The refrigerant of an air conditioner is filled inside the evaporator coil. Under normal circumstances, the evaporator coil has warm air around it to function properly. However, one of the causes of air conditioning problems is the evaporator coil becoming too cold. This usually happens when the airflow is obstructed.
This results in the formation of a layer of ice on the outside, leading to the air conditioner throwing warm air instead of cold air. This calls for an air conditioning service as soon as possible.
3. Dirty Condenser Coils
The heat that is collected from the air has to be expelled out of the building. This is done by the condenser coils of the outdoor unit. The condenser coils have to be clean to be able to expel the heat efficiently. With air pollution and climatic factors, these condenser coils get covered with dirt and grime, which hinders their performance. To make sure the outdoor unit is clean, you need to call for an air conditioning service so that the heat expulsion is not compromised.
4. Fan Problems
An air conditioner has two fans. One fan blows air over the evaporator coil to cool the air, and the other blows air over the condenser coils in the outdoor unit to expel the hot air outside the building. There are many reasons why either fan may stop working at the best of its ability. There may be a faulty motor, too much debris or dirt, lack of lubrication, or worn belts.
Whatever the cause is, the end result will be air conditioner problems. If you do not get an air conditioner service the compressor may fail, which is the last thing you would want. The failure of the compressor is literally the death of an air conditioner.
5. Leaking Ducts
The cooled air is carried throughout your home through the air ducts that are concealed within the walls and ceilings. The ducts may leak due to many reasons. It may be due to rodents or even carelessness on the installation worker’s part. If the ductwork of an air conditioning system leaks, the cooled air winds up within the walls, which is of no good use.
As a result, the air conditioner has to work extra hard to keep up with the temperature requirements. When there is a leakage in the ductwork, you need to get a professional air conditioning service to make sure that your air conditioner problem is solved before the air conditioner breaks down irreversibly.
6. Thermostat Problems
The thermostat is like the brain of your air conditioner. It tells the air conditioning system about the current conditions of a room. The thermostat is an automatic component that turns on and off depending upon the temperature. When the temperature of the room is higher than what’s desired, the thermostat is switched on, while when the desired temperature is reached, the thermostat is automatically turned off.
If there is a problem with the thermostat, the air conditioner will have no input regarding the current temperature, and this will result in air conditioner problems. This makes calling for an air conditioning service a must.
7. Clogged Drains
An air conditioner cools the room and removes excess moisture from the air. Just like the heat is expelled out of the building, the collected moisture has to be removed, too. The moisture that the air conditioner collects is removed through the drain pipe. If the drains are clogged, the moisture either backs up or starts to accumulate in the walls or ceilings. This not only affects the air conditioner’s efficiency, but also results in the growth of mold inside your walls.
You should call a professional air conditioning service in Dallas, TX to unclog the drains and restore the air conditioner’s efficiency.
Air conditioning service in Dallas, TX cannot be delayed when there are problems with the air conditioner. These problems require technical and professional attention.
If you are looking for the best service providers for air conditioning service in Dallas, TX, One Hour Heating and Air is the place you should go. Give them a call on their number (817-283-6911) and avail the best services today.