Photo By Geo Martinez at Shutterstock
Many air conditioner problems are common yet most people do not know how to identify or solve them. They can be caused by various things. This includes unprofessional installation, insufficient maintenance or irregular services.These problems are often a consequence of ignorance on the customer’s part. This is why it is important to know the basics about air conditioner problems and what you can do to try to solve them.
Recognizing the problem is usually half the work. Once you know what is wrong with your air conditioner you can easily contact a Heating and A.C repair in Dallas, TX. Be sure to contact a trusted service provider like One Hour Heating and Air. With their professional knowledge and proper training, they will surely be able to fix the problem for you.
1. Clogged Drains
Clogged drains can easily be fixed by a Heating and AC repair in Dallas, TX. All you have to do is recognize the problem.
All the humidity that the air conditioner gets from the air has to be drained somewhere. It is supposed to exit the air conditioner through a drain line into a pan which goes down a drain. However, if the drainpipe gets clogged then all this water can go backward.
This will result in water getting gathered inside the air conditioner and harm your system. Such water leaks can cause more damage leaking on the walls, ceilings, floors or furniture. If you don’t notice this water leak right away it can even cause mold growth.
So be careful and always make sure there is no water leakage from your AC. If you do notice this, contact a Heating and A.C repair in Dallas, TX right away.
2. Thermostat Problems
If the thermostat in your air conditioner is incorrectly calibrated, then it will never work properly. How can the system work properly when it is getting the wrong instructions to begin with? This is why you must make sure there are no thermostat problems in your air conditioner. You can check the manual of your air conditioner to fix its settings. You may also find some basic instructions to fix this on the website of a Heating and AC repair in Dallas, TX.
If you still feel the A.C is not working according to the temperature you set then it is wise to call a trained technician from a Heating and AC repair in Dallas, TX. They will make sure the thermostat has been calibrated correctly.
3. Low Refrigerant
The refrigerant is a chemical removes the undesirable from the air, including heat and humidity. So if you feel your air conditioner has been switched on for hours but is unable to cool the room, it is best to get a professional inspection from a Heating and AC repair in Dallas, TX. It might be that the refrigerant has been used up and is running low. In such a case, it can simply be refilled to fix the problem.
On the other hand, if there is a leak in the refrigerant lines, it will cause a permanent hindrance to the cooling process. This is a difficult problem to fix. The technician has to find every leak in the refrigerant lines and fill that to avoid leaks in the future and only then they can refill the refrigerant. This is a time-consuming task. Only an experienced and skilled worker from a Heating and AC repair in Dallas, TX will be able to solve this problem for you.
4. Dirty Condenser Coils
The condenser coils are part of the outdoor unit of your air conditioner and they help the heat exit from the room. If they are dirty then this will seriously harm the performance of your air conditioner. If the heat is not properly exiting the room then your air conditioner will have to work harder to cool the same room. This can cause early wear and tear of the electrical appliance.
Make sure to clean the outdoor unit once in a while to make sure the condenser coils are working properly. If you feel your outdoor unit is extremely dirty and has accumulated dirt and air conditioner then it is better to get it serviced professionally by a Heating and AC repair in Dallas, TX.
5. Leaking Ducts
Your air conditioner works hard to provide you with the comfort of a cooler and more comfortable room. The ductwork is what carried this cool air to different spaces throughout your room. This cool air can easily be lost to the inside of your walls if you have leaking ducts. This results in unnecessary loss of cool air and leads to higher electricity bills for you.
This problem should be thoroughly inspected before the installation of an air conditioner in any room. It is best to consult a trained worker from a Heating and AC repair in Dallas, TX to install your new air conditioner in a room. They will carry out a proper inspection to make sure there are no leaking ducts to avoid this problem.
Overall, these are the most common problems that are faced during the daily use of an air conditioner. It is important to notice slight changes in the performance of your air conditioner to be able to properly maintain them.
Constantly overworking an air conditioner that is facing any of these problems will not only result in higher electricity bills but it will also cause wear and tear to your air conditioner. This is why recognizing the problem is just as important as fixing it. Delays in maintenance can cause long term damage to an air conditioner.
Regular and timely service from a trusted Heating and AC repair in Dallas, TX can surely help minimize these problems and keep your air conditioner performing at its best. Visit One Hour Heating and Air or call 817-283-6911 for an emergency repair visit today!