Photo By Alliance Images at Shutterstock
In places where temperature keeps varying between the extreme heat and cold, it is imperative to install an HVAC (heating, ventilation and air conditioning) system. Other than that, a state of the art heating enabled air condoner is required at the very least.
However, these sophisticated machines are very delicate and require frequent maintenance and service procedures, otherwise, they become prone to breakdowns. This is why it is very important to refrain from any sort of DIY (do it yourself) initiatives when it comes to heating and AC Repair in Fort Worth, TX. Here, it is always considered the best practice to work only with highly skilled experts who are singularly adept at heating and AC Repair in Fort Worth, TX.
Thanks to the rapid advancement in many different climate control technologies, the bulky HVAC units are now being phased out. As of today, split and even window based, heating enabled AC setups are now taking their place. This means that there is no need to maintain bulky furnaces, and massive ventilation units and also shell out large amounts for heating and AC Repair in Fort Worth, TX.
In other words, it is now possible to enjoy the best of both worlds. That is, without putting in all the extra funds, effort and time that may be required to both install and maintain a heavy-duty HVAC climate control unit. However, even heat enabled AC units to require routine maintenance and repair on a periodic basis. These are some of the more important steps that are required for heating and AC Repair in Fort Worth, TX:
• Cleaning the Fan unit
All HVAC and AC units are equipped with a powerful blower or fan. As long as this fan is not clogged with dirt or grime, it will work flawlessly. However, extensive usage can mar its efficiency. By this, it is meant that the weight of the dirt can decrease its speed. Not only will lit put considerable pressure on the compressor and thermostat, but it will also increase your power bill. This is because the appliance will have to work extra hard in order to control the temperature in your room.
If the weight crosses a certain threshold, it can lead to a short circuit and the complete burnout of the blower motor. Yes, it is possible to open the unit and run a cloth over the fan’s blades. But for proper heating and AC Repair in Fort Worth, TX you will require the expertise of highly skilled professionals. They will completely dismantle the fan and go through all of its constituent components by carefully placing them in a mild detergent bath. Once the grime has been loosened enough, they will clean it off with a soft cloth. Finally, they will dry them and place all the components back in their proper place.
• Cleaning the Filters
The good people responsible for heating and AC Repair in Fort Worth, TX. will also clean other components such as air filters. If the filters are chocked, it will mean that the blower will have to work extra hard to compensate. It might overheat and burn out. Apart from that, air filters are the first line of defense against dirt, dust, pollen and other disease and allergy-causing microorganisms. If you want to breathe clean and clear air you should always get your air filters changed by the specialists responsible for heating and AC Repair in Fort Worth, TX as and when required.
• Checking the Refrigerant Gas
If your climate control system is not able to maintain its desired temperature settings, then it is likely that its cooling gas has leaked. If this is the case, you should not wait for your system to lose its cooling capability completely. In fact, you should call in the experts at heating and AC Repair in Fort Worth, TX. They will check the system for any leaks and then proceed to plug them with a high powered blow torch that they will bring with them. After that, they will purge the system of all of its old, stale refrigerant and fill it to its maximum capacity with fresh cooling gas. They will then reinstall the system back into its original place once again.
• Cleaning the Condenser Coils
The condenser coils are a critically important part of heating and AC Repair in Fort Worth, TX. This is due to the fact that these coils carry the refrigerant gas in the system this means that they are directly responsible for maintaining the temperature displayed on the thermostat. Cleaning these coils is an arduous process and requires the application of high powered jets of water that will wash away all of the accumulated grit and grime. After that, these coils will be blow dried with powerful external blowers. Finally, all of the bent and fragile cooling fins will be carefully straightened with the help of a ‘fin comb’ that the experts at heating and AC Repair in Fort Worth, TX will bring with them. This instrument will be able to enhance the working life of your evaporator as straight fins work a whole lot better than their bent counterparts.
If you have any other queries regarding heating and AC Repair in Fort Worth, TX you should get in touch with the professionals at One Hour Heating and Air. These true blue professionals are considered to be the best AC repair outfit in the Fort Worth, TX area.