How Well Do You Know Your HVAC System? | Heating and Air Conditioning Repair in Fort Worth, TX
We all know how important an HVAC system is in our homes. It helps us survive through different seasons, giving us a cozy and comfortable indoor environment especially if you are living in Fort Worth, TX.
When it comes to HVAC and its repair and maintenance, there are so many questions people wish to ask regarding their heating and air conditioning systems. Not every homeowner is well aware of an HVAC system especially its components. However, to help you understand your heating and cooling system in detail, we took the most relevant of all those questions and decided to answer them in one place.
Sounds great, right!
So if you have your notepads ready to note down the important facts and tips, let’s dive in!
Question #1 – When Should You Check or Replace Your Air Filters?
Would you believe that the healthiest maintenance program would suggest a monthly check? As per the technicians of heating and air conditioning repair in Fort Worth, TX, if your HVAC uses disposable air filters, then instead of cleaning them, you should replace them monthly. The pleated filters, on the other hand, can be replaced after a healthy usage of three months.
Of course, all of this depends on how often you use your heating and cooling system. Remember clogged air filters also lead to higher energy bills as your HVAC system struggles to maintain the temperature.
Question #2 – What Does Emergency Heat Mean?
The heat pumps of your heating and cooling system always have a supplemental heating source. This is always in the likes of an electric resistant heating from your indoor unit. Other than electricity, these supplemental heat sources can also be via hot water back-up, oil and gas. That said, emergency heat refers to when the supplemental heat kicks on without using the heat pump first.
Question #3 – What Is the Proper Level of Indoor Humidity?
The optimum range as explained by experts in heating and air conditioning repair in Fort Worth, TXis within the range of 30% and 40%. Above this level, condensation begins to fog the windows of your home, which then acts as a catalyst for mold. You wouldn’t want mold in your homes because they lead to problems like difficulty breathing or allergies.
Another cause for allergies is dust mites, which are known to thrive best at a 50% humidity level. Molds, however, are allergens which thrive best at the 60% humidity levels and are one of the basic reasons for respiratory infections, allergies, and asthma.
So keeping your HVAC system well maintained and clean is also important from your family’s health point of view. It is important to ensure fresh and clean indoor air and to avoid different allergies or breathing issues.
Question #4 – Is Emergency Heat More Expensive?
Definitely yes! This heat should only be running in emergencies, as the name implies. An example of these emergencies can be when for example a tree fell on your outdoor unit and crushed the heat pump. This is when you can go ahead and use the emergency heat setting for your HVAC.
Question #5 – How Do I Remove the Air Filter?
The first step to do this should be to turn off the thermostat and look for the access panel. Only then you will be able to carefully remove the air filter. Then you can take this air filter into your garden or bathroom to spray off with some water pressure. Depending upon how dirty the filter is, you can repeat the process a few times. Just make sure you don’t use too much pressure because this can damage the filter media.
When you think that the filter has been cleaned enough, you should shake off the excess water and then set it somewhere to dry off. Installing it back again while it is damp is not recommended and can be bad for your heating and cooling system, as the professionals of heating and air conditioning repair in Fort Worth, TX suggest.
When it has dried off, you can slide it back into place and note whether the airflow is in the proper direction. If it is, then you can repeat the process again next month. If not, then you should heed the advice of a technician for HVAC.
The Importance of Having an Efficient HVAC System
Ventilation and heating are of utmost significance in both our commercial and residential buildings. That is exactly why we install a proper and efficient HVAC system. Air conditioning, ventilation, and heating systems work to maintain the proper safety and comfort of building occupants.
Air conditioning and heating components also assist by controlling the proper airflowand indoor climate, ensuring that neither we freeze or excessively sweat. If we consider the health benefits of having an efficient HVAC system, as we stated earlier as well, an efficient HVAC system ensure the prevention of mold and mildew. As we know that bacteria, mold and mildew thrive in damp warm areas, we must do our best to keep our HVAC system well-maintained.
One way to ensure the efficiency of your HVAC system is to ensure its regular repair and maintenance by hiring the professionals of heating and air conditioning repair in Fort Worth, TX. In addition to that, it is also important to purchase the right equipment for the right space. For instance, select the right size and model, considering the overall space in your room or house.
One Hour Heating and Air
While these were just a few of the problems that your heating or cooling system might face, there may be so much more you would want to inquire about. If you have a different issue, or just need us to expand on one of these issues, you can go ahead and contact our dedicated team of technicians by dialing the 24/7 customer helpline number. Also,don’t forget to take the professional insight about keeping your HVAC system well-maintained at all times.