What’s Wrong with Your Gas Heater? | Tips from Your Fort Worth, TX Heating and AC Service Provider
Photo By Albina Glisic at Shutterstock
You are shivering. It’s the middle of the night. You curse your luck, drawing your blanket closer, and realize your heater’s acting up again.
This is the third time this month. Why does it keep breaking down?
Luckily, you don’t have to be in the dark for long. This guide to gas heater problems can help you figure out what’s wrong.
What’s Wrong with Your Gas Heater?
Pilot Light Issues
If you have problems with the pilot light or ignition, you should really consult an expert. The heater’s numerous components will need to be examined to see if they have clogs or maintenance issues.
Pilot light issues will additionally need examination of the room the heater is housed in. The trick with pilot lights is that they need to be in a properly insulated area to work. If the pilot light is exposed to wind, drafts or other elements in the environment of the Fort Worth, TX area, there could be problems.
Wear and Tear
The furnace is a machine and like any other machine, it will eventually get worn down. If it faces a lot of wear and tear, you might need significantrepairs or replacement services from your local ac repair provider in the Fort Worth, TX area.
Gas Problems
When you have a heater based on gas as its power source, you should always have professionals look at the gas feeds, valves and regulators from time to time. If a gas leak occurs, you could possibly get carbon monoxide poisoning or even a fire.
If you suspect that there is an issue with anything regarding the equipment for the gas supply, have an acservice provider, to look at the heater immediately.
Clogged Filters
When your air filters are clogged you will have problems with the fan, the limit switch and the airflow. This can take a toll on the furnace and make the furnace malfunction.
How can you tell if you have a clogged filter? A common sign is the lack of proper air flow from the heating vents. Furthermore, the gradual breakdown of the furnace or limit switch will tip you off to problems. However, you should get heating repair services way before that point.
Furnace Problems
Your furnace might also cause a lot of trouble by not heating adequately or at all. Both of these issues could be because of power, pilot light, or sizing issues. You might want to get a professional to check the issues if you notice any troubling signs.
These signs could include heating issues as well as noises that might come from the furnace. These noises could be rattling and squeaking and should alert you to clogs or other furnace problems.
Cycling Issues
Sometimes, a heating unit can have cycling issues where you might have the gas heater turning on and off too often. This can usually be because of thermostat issues or clogged filters.
You should always maintain the air filters as the dust in the Fort Worth air, along with other pollutants, might cause this problem to recur very often.
Blower Issues
Another common issue with most furnaces in the Fort Worth, TX area, is the problem with blowers. If you notice that your furnace’s blower is constantly running, you should call an ac repair service provider.
This is because there may be a problem with the limit switch which can actually be hazardous and can cause dangerous temperature spikes.
What Steps You Should Take
Check Individual Components
You should always check and change components in a gas heater if it is necessary. You should replace and clean your filters once a month during the heating period. You should similarly check and reset the thermostat. If it is not working correctly, you will need battery replacement or thermostat repairs.
You should ideally keep a maintenance and checkup schedule so you can be aware of any issues and nip them in the bud. If issues arise for instance if a furnace defaults, you should have the circuit breaker and power connections checked and fixed.
Do not attempt to fix these issues yourself; blown fuses and faulty circuit breakers must be handled by a professional. However, if the problem is an unplugged cord, you can remedy that easily on your own.
Get Maintenance Services
You should always get maintenance services near fall in Fort Worth, TX. This will help you be prepared for the oncoming winter season and give you enough time to fix, replace or renew any part or fuel source you might need.
If your heater is getting wear and tear, it’s probably a good idea to get the appropriate acmaintenance repairs in the warranty period. Otherwise, you should look to replace the heating unit completely before any danger arises.
Check, Fix or Replace Your Furnace
If your furnace is not heating up properly, you probably need to first check if the thermostat is programmed correctly. You will need to see if the heat mode is activated and if the thermostat is at the required temperature.
If this is not the issue, you might want to call an ac repair service to either repair your current furnace or install a replacement.
Contact Us!
One Hour Air Conditioning and Heating is always available for your HVACneeds.
We provide extensive professional ac services, maintenance, checkups and replacements in Fort Worth, TX.
If you need services like geothermal unit installation, heater maintenance, and ventilation checkup, you should call us. You can contact us through this number for regular or emergency services: 817-283-6911.