There are some obvious and not-so-obvious answers to this question. Obviously, when mercury starts to drop, it’s time to consider replacements. Weather is also one of the considerations because of which people make the most calls for heating and air conditioning repair in Fort Worth, TX.
So if you have some weather changes approaching, you should ensure that your toes and nose will be nice and toasty throughout. That being said, there are some considerations that most homeowners don’t seem to know about. This is probably why they call for emergency heating and air conditioning repair in Fort Worth, TX.
Why not learn about these warning signs beforehand? Let’s have a look at some such ominous signs and teach you how to figure out whether you furnace needs some tune-ups or a complete replacement.
Advice from the Experts of Heating and Air Conditioning Repair in Fort Worth, TX
1. You Have a Furnace That Is Older Than 15 Years
If your furnace has passed its 15-year mark, then you must have noticed that it constantly needs maintenance and repair. This points towards the fact that the furnace has most likely depreciated past its useful life and may need to be replaced.
The furnace that has served you and your family for years may still be working. We agree, but what we’re trying to say here is that it is not operating at its maximum efficiency. Haven’t you noticed your utility bill increasing considerably over time?
Furnaces are quite like motor vehicles. The older they get, the more maintenance they seem to require. Even if you want to get every bit of value from your investment, you should know that most expenses and breakdowns tend to happen in the last 2 years of a furnace’s life.
We’ll move on forward with a general rule of thumb. If the cost of repairs on your furnace has gotten higher than its initial investment by 50%, then it’s probably time to say goodbye. If you don’t know where to start looking, you’d better speak to professionals in the industry of heating and air conditioning repair in Fort Worth, TX.
2. Your Equipment Repairs and Energy Bills Are Steadily Increasing
Older furnaces have been found to be putting in a lot of extra effort to provide the stand level of heating output. When this happens, they cause the energy bills in homes to increase quite noticeably. We aren’t talking about slight increases – because these are normal for both older and new furnaces.
The energy bill increase that makes you do a double-take is probably what we mean by significantly increase. Similarly, if your handyman for heating and air conditioning repair in Fort Worth, TX is on a first name basis with you, it’s probably time to consider replacement options.
3. The Different Rooms in Your Homes Have Different Temperatures
An old and inefficient furnace will sometimes also result in the different rooms in a home to have different temperatures. This tends to happen when the duct system of your furnace has become outdated or is losing its former abilities to effectively distribute even heat throughout your home.
If you have this problem with your furnace before the crucial-furnace-use season, then you will really need to get hold of contact numbers for heating and air conditioning repair in Fort Worth, TX.
4. You Keep Finding Soot around Your Furnace Registers
It is quite ordinary for older furnaces to start spewing rust particles, dirt or dust from their ducts or registers. In such situations, soot will not only be irritating for people who like to keep their home sparkly clean but can also be a potential hazard for health.
If you spy rust or soot around the furnace registers of your home, you should also know that your furnaces are emitting excessive CO2. When this is the case, then problems like excessive dryness will be a normal occurrence. This will be noticed in the characteristics of plants, furniture, wood flooring and even the walls of a home.
That said, you will either need heating and air conditioning repair in Fort Worth, TX or a complete furnace replacement.
5. Your Furnace Has Become Extra Noisy
It is normal for furnaces that are in their most crisp condition to make a rumble when they turn on or off. These noises, however, tend to progress over time and become quite loud. When this begins to happen, you should take the hint and begin considering a replacement.
Sounds that come from older furnaces can be described as screeches, humming, banging, and popping among so many others. When you hear such sounds, it is a telltale sign for every homeowner to consider furnace replacement options.
As described by professionals of heating and air conditioning repair in Fort Worth, TX, every sound has a different meaning.
If You Hear:
- Rattling: then your ductwork is probably unsecured and you may have some loose sheet metals or screws.
- Popping: These sounds represent parts of the furnace reacting to temperature changes within the system.
- Humming: This sound is caused because of the furnace’s fan motor and these should never be disruptive and loud. If they are, then this means that blower fan motor has begun to fail.
- Squealing and Screeching: If you hear such sounds, then your furnace may be facing an overall issue with the inducer or blower motor.
Haven’t called for heating and air conditioning repair in Fort Worth, TX before? We can help you out.
One Hour Heating and Air Condition Repair in Fort Worth, TX
While you can recognize most or all of the warning signs above, we recommend that you have a professional perform repairs or replacement. You’ll find that our experts will be more than happy to help.
Go ahead and visit our website to have a look at our services or call at 817-283-6911.