People who maintain their air conditioners regularly get through the sweltering summer in Fort Worth, TX quite comfortably. But the constant use of an air conditioner also means higher energy bills. While higher energy bills are an inevitable expense during the summer season, you can at least keep the cost of heating and air conditioning repair in Fort Worth, TX down by following some tips.
If you are wondering how you can reduce the repair and energy cost of your air conditioner, read on.
Ensure regular tune-ups
One way to keep from shelling out excess money for frequent repairs is by performing regular inspection and maintenance of your unit. When you overlook the need for regular maintenance, you also neglect the warning signs. This causes even a small problem to escalate and result in complete replacement of the unit by hiring a heating and air condition service in Fort Worth, TX
So avoid this breakdown by keeping an eye on any maintenance related issue. The best way to ensure this is to have professionals of heating and air conditioning repair in Fort Worth, TX come over and inspect the unit regularly. When you keep your air conditioner up-to-date, you increase its longevity without incurring an additional cost that surprises you in the form of higher energy bills and frequent repairs.
Purchase the best quality cooling system
Another important factor that you must remember is that you should purchase only the best quality air conditioner. While you may save some money by installing a low-quality unit, you will have to incur a lot more cost in terms of its repair and maintenance throughout its lifespan. If you want to get a better idea about which air conditioner or model you should purchase, you can take the recommendation of the experts of a heating and air condition service in Fort, Worth, TX.
Your air conditioner is your long-term investment so it’s better not to count pennies at the time of purchase. The best way to check the efficiency of an air conditioner is by checking its Seasonal Energy Efficiency Rating – SEER. This indicates the quality of cooling for every unit of electricity. Higher numbers mean that the air conditioner will provide more cooling for every unit of electricity.
For instance, if you replace the air conditioner of efficiency rating 15 with the SEER of 20, you are saving almost two-thirds of the energy cost. Moreover, a good quality air conditioner reduces the need for frequent repair and maintenance by hiring the professionals of heating and air conditioning service in Fort Worth, TX.
Install a programmable thermostat
If you do not spend much time in your home and stay out, you should go with a programmable thermostat. This is important because almost half of your energy bill comprises the use of HVAC systems. So if you install a programmable thermostat, you can significantly reduce the amount of energy that gets wasted in the process. With a programmable thermostat, you can make adjustments to the temperature by regulating the air conditioner while you are away or even in your home.
This also helps in maintaining adequate temperature when you are sleeping or just enjoying a day off. This will significantly reduce your energy bills, especially in comparison to units that continue to run at gun blazing capacity. To get a programmable thermostat installed, make sure you hire only the professionals of a heating and air condition service in Fort Worth, TX
Make sure the outdoor and indoor units match
If you are unsure of whether or not your indoor evaporating coil matches with the outdoor condensing or air conditioning unit, get the assistance of a heating and air condition service in Fort Worth, TX. You can perform this check anytime when you need to replace the outdoor unit. Similarly, you must always consider this as one of the most important factors when you purchase an indoor or outdoor unit.
When you keep the indoor unit compatible with the outdoor unit, you eliminate the disparity between a high-efficiency outdoor unit with the low-efficiency indoor unit. This functional disparity can cause severe damage to the compressor valves and the unit’s compressor, requiring you to replace it more frequently than it should be.
Clogged air filters
Clogged air filters are one of the most basic reasons for an air conditioner’s poor performance. The clogged air filters restrict the smooth airflow, causing the system to work less eficiently. This is because your air conditioner struggles to maintain vthe required temperature inside the space. When an air conditioner struggles, it takes up more electricity. This eventually increases your energy bills, and causes frequent breakdown of the unit.
So it’s important to regularly change and clean the air filters so that you can avoid these problems. This will also help in reducing the energy and repair costs. To avoid the frequent need for air filter replacement, simply replace the regular air filters with reusable ones.
Inspect potential air leaks
Always keep an eye on potential air leaks in your space. If there are potential leaks in a space, it will put additional strain on your air conditioner to maintain the room temperature. Leakages also result in wastage of energy, and this eventually adds up to the cost of your energy bills. Moreover, your unit will break down frequently or its efficiency will be significantly reduced in the longer run. To avoid paying higher energy bills, calling the assistance of a heating and air condition service in Fort Worth, TX for regular inspection is a smart idea.
If you need to hire the professionals to get your air conditioner inspected or serviced, call One Hour Air Conditioning and Heating Service right away. Their team of technicians is not only well-versed but also highly experienced in dealing with regular and complex HVAC issues.
Also, in the case of any emergency situation, you can always take their assistance by calling on their emergency helpline numbers.