Photo By fizkes at Shutterstock
The weather of Fort Worth, TX may be unpredictable, so this is all the more reason that no homeowner can do without a functioning HVAC in their house. Whether it’s the scorching heat of the summers or the dry spells of the cold season, an HVAC system is a necessity to keep indoor temperatures nice and pleasant.
Before the HVAC season arrives, a common homeowner practice is to take the unit for a brief check-up. While that is a good thing to do, seasonal maintenance can cause long term damage.
If you’re only taking it for heating and ac repair in Fort Worth, TX twice a year and neglecting it the other half of the time, then your system may develop permanent faults. While your HVAC system is one of the greatest sources of comfort in your home, it isn’t immune to failure and defects. There’s always a chance that your negligence, poor installation, lack of maintenance, or the age of the unit could cause your HVAC system to become faulty.
If you notice an unusual sound, smell, or another alarming sign in the system, then get in touch with a reliable professional for heating and ac repair in Fort Worth, TX. To help you detect any troublesome symptoms in your HVAC unit before it gets too late, here are some important signs to watch out for.
1. Burning, Electric Smell
If you can sense any smell from your HVAC system, then there is a chance that the motor is malfunctioning. Your electrical wiring could also be damaged and may need urgent repair.
The burning smell is primarily indicative of an acute internal fault in the HVAC unit. When the system is under jeopardy, it can always escalate to a fire incident in the house. You should get in touch with a professional contractor for heating and ac repair in Fort Worth, TX before the damage gets out of hand.
Immediately turn off the master switch to make sure the unit is not operative. The same rule applies to all your other appliances. Always keep a reliable contractor on speed dial to help you in emergency services.
2. Visible Water Leaks
Water leaks are one of the easiest symptoms to detect. If you notice water leaks like visible droplets from the system, then either the condensate pump is broken or the evaporator coil has frozen completely.
If your furnace is leaking, then the drain is probably clogged. Any kind of moisture around the unit can becoming a breeding ground for mold. If you don’t dry out the water, it can pose dangerous slipping hazards.
If you notice even a small puddle around the system, get in touch with a professional for heating and ac repair in Fort Worth, TX for maintenance and consultation. Another possible cause could be the drainpipes that are not connected properly. Clogged drains can cause the water to flow backward right into your house.
If there are other electrical switchboards or appliances around the HVAC system, the situation could potentially lead to sparks. In any case, it’s best to consult your contractor for heating and ac repair in Fort Worth, TX to solve the issue immediately.
3. Power-Related Issues
Another common issue most HVAC units are beset by is an unexpected shut down. Usually, when the breaker trips, there is a deeper electrical issue that causes your cooling or heating system to shut off. The electrical issue might just escalate to a threatening situation like a house fire.
If your HVAC system shuts down all of a sudden, without any explainable cause, then you should immediately get in touch with a professional for heating and ac repair in Fort Worth, TX. The more you delay calling a professional, the worse the problem can get.
4. Low Air flow
If your HVAC system is blowing warm air or little to no air, then it’s time high time you should call a heating and ac repair in Fort Worth, TX. There are many underlying causes like leaky ducts, clogged filters, or a sluggish fan.
The HVAC system won’t work properly unless the damage is repaired by a professional. It’s important to seek a reliable service for heating and ac repair in Fort Worth, TX to identify the origin of the issue. If the blower motor is slow-moving and sluggish or the fan is coated with dirt and grime, your HVAC throw less pressure.
Another possible culprit could be dirty coils. The coils are responsible for releasing the heat out of the system. They are usually placed towards the outdoor section, which is why they can catch dust and grime. Whether it’s getting your coils cleaned, unclogging the filters, or resolving some other issue in the HVAC system, always get in touch with heating and ac repair in Fort Worth, TX.
5. Musty or Moldy Smell
Normally, AC units produce plenty of moisture internally because of condensation buildup. However, it’s important that this moisture remains inside the unit. This is because if any of this moisture spills into the ductwork, it can quickly result in mold growth, which can damage your system over time.
When the ductwork develops faults or gets jammed due to moisture, you will sense a musty smell coming from the unit. Hiring a professional for heating and ac repair in Fort Worth, TX will help you find the source of the moisture and make any necessary repairs to save the unit from greater damage.
A Final Word
As a homeowner, it’s important to acquaint yourself with all the signs that could be harming your HVAC unit. Your system is one of your greatest investments; therefore, it’s important to take it for regular heating and ac repair in Fort Worth, TX.
If you’re looking for a reliable company that is committed to excellent customer service, then get in touch with One Hour Heating and Air. Our skilled technicians are available 24/7 for any electrical emergencies and repair when it comes to your HVAC system.