FAQs about Buying a New Heating and Air Conditioning System in Frisco, TX
Almost every house in Frisco, TX has a heating and AC system. It allows the homeowners to enjoy the cool air of air conditioner in the sweltering heat of summers and to keep their homes warm and cozy during the chilly winters. Therefore, it does not come as a surprise that for most people, imagining a life without a heating and AC system is next to impossible.
Even though the heating and AC system is an important part of the house, most people hardly know anything about it. While this may not feel like a problem as long as the heating and AC system is running well, this lack of knowledge about the HVAC units becomes an issue when it’s time to buy a new heating and AC system for your house.
It is important to understand that buying an HVAC system is not an everyday task. Most people don’t invest in buying them every other day. Therefore, it is only natural to get a bit confused when you finally have the task of buying a new heating and AC system at your hands. Naturally, you will have a number of questions. If you have unanswered queries about buying a new HVAC system for your house in Frisco, TX, just scroll down to read about the 3 most frequently asked questions about buying a new heating and AC system in Frisco, TX.
1. How do I know when it is time to buy a new heating and AC system for my house?
This is a very common question. One of the most common mistakes that a lot of homeowners make is that they either replace an HVAC system too early or wait too long to do it. Both situations are equally bad!
Keep in mind that although your HVAC system may require occasional repairs and a number of quick fixes over the years, a well-maintained heating and AC system has a lifespan of around of 10 – 15 years. Here are a few signs that may indicate that it is time to invest in a new HVAC system for your house in Frisco, TX.
Unreasonably High Energy Bills
If you notice that you are receiving unusually high energy bills, it might be due to your heating and AC system. Over time, the working capacity of an HVAC system is bound to decrease, leading it to work double time. This can cause your energy bills to rise. However, before you invest in a new HVAC system, it is advisable to be 100% sure that it is what is causing the high energy bills. Your best option is to call in an HVAC expert to have your heating and AC system examined.
Strange Noises
Excessive noise is an indication that there is a faulty part in your HVAC system. If you notice that your heating and AC system is producing unusual sounds, it is advisable to contact the HVAC experts of Frisco, TX. The damage might be repairable but if that’s not the case, you may have to invest in a new heating and AC system for your house.
Insufficient Heating and Cooling
If your HVAC system fails to maintain the desired temperatures in the house, you might have to change it. Keep in mind that, generally, there are only two reasons for this. Either your heating and AC system requires maintenance or repair, or it is too small for your house. In the latter case, there’s no option but invest in a new heating and AC system.
2. What are the things that I need to consider while buying a new heating and AC system for my house in Frisco, TX?
Heating and cooling capacities are the two most important factors that come into play when you are buying a new heating and AC system for your house. These factors help you determine how well the system that you are considering to buy fits your requirements. They help you determine if the HVAC system is the “right size” for your house. Let’s take a look at what heating and cooling capacities are.
Heating Capacity
The heating capacity of an HVAC system shows two types of readings – input capacity and the output capacity. While input capacity measures the amount of fuel or gas that is required by your heating and AC system to per unit of produced heat, output capacity is the measure of the heat that is being produced. In other words, input capacity gives you a general idea of the energy consumption of your HVAC system and the output capacity indicates the amount of heat produced.
Cooling Capacity
The cooling capacity of a heating and AC system is used to measure the working capabilities of the air conditioning unit. The cooling capacity is measured in “Tons” and 1 ton is equal to 12,000 BTUh (British thermal units per hour). The higher the number of tons, the greater will be the cooling capacity. Meaning, the better will be AC system at cooling the house.
3. Are there different types of heating and AC systems?
Yes, a number of different types of heating and AC systems are readily available in the market. Choose the system that fits your requirements the best. Here is a list of some of the most common types of HVAC systems for houses in Frisco, TX.
- The hybrid dual fuel system
- Boiler & Radiant Heat System & Air Conditioner
- The spilt HVAC
- Standard Central Air Conditioners & Furnace Split System
- Ductless HVAC unit
- Geothermal Heat Pumps
- Heating Pump & Gas or Oil Furnace Split Systems
- Mini Split Heat Pumps
- Heating and AC package units
If you can’t decide the best type of HVAC system for your house, don’t hesitate to seek help from an HVAC expert. Make sure you contact only the most trusted heating and AC experts of Frisco, TX like One Hour Heating and Air to get the best HVAC systems and services.