Signs You Need to Change the Compressor for your Heating and AC in Fort Worth, TX

Signs You Need to Change the Compressor for your Heating and AC in Fort Worth, TX

The compressor unit is often the one under the biggest risk in an HVAC system present in your home. Considering that the compressor does most of the work that is needed for generating cool air inside your home, it does experience failure occasionally, when put under constant use. Since the hottest months of summer season are upon us, most homeowners would be extensively using their heating and AC in Fort Worth, TX. The cooling system would be on all day, as they would look for relief from the sweltering temperatures outside.

As the compressor is under so much stress, there are chances that it might succumb to the pressure and fail under it. Thus, the responsibility to locate any errors in your heating and AC in Fort Worth, TX falls upon on your shoulders. Locate any error if possible, and report them to an experienced professional who can handle it well.

However, to locate an error in the compressor for your heating and AC in Fort Worth, TX, you need to know the common symptoms often associated with compressor problems. These symptoms are:

A Ticking Noise

We have talked a lot about chattering or ticking noises coming from your Heating and AC in Fort Worth, TX during the past. Moreover, we’ve also shed some light on what to do if the noises are coming from a specific component. In this case, you should immediately be alerted if the noise is coming from the compressor located within your system. Look out for signs of repair and have a professional repairman come and inspect your heating and AC in Fort Worth, TX.

A noisy air conditioner system is always pointing towards a repair job. The burden of running that repair job falls upon your shoulders. You should recognize the need for the repair, and handle it with control to take out any risks. You should listen for noises when you first start the system. If your system starts giving a ticking noise as soon as you turn it on, then chances are that the compressor has gone wrong.

Rattling Noise

Other than the sound above, if you hear a rattling noise from your heating and AC in Fort Worth, TX, then chances are that the motor mounts inside the compressor have failed and the motor responsible for distributing cool air has gone loose. Once the motor goes loose, it starts thrashing against the sealed area that is used for housing it. It is best to call for a professional to manage this repair, because you may not have the sufficient information for handling such an extensive repair.

Your compressor itself has numerous complicated equipments inside of it, and failure to comply with safety standards while fixing the compressor can lead to serious repercussions. Thus, have someone who knows their way around the complex machinery of the compressor and will feel at ease while working with the equipments needed for the job.

Moisture Leaks

The third clearly visible sign of a compressor that needs repair as soon as possible is a moisture leak near the area for the compressor. If you find puddles of water near any of the sections for your HVAC system, then chances are that refrigerant is leaking from within the compressor. For those who don’t know, the compressor is responsible for taking the liquid refrigerant and turning it into cold air. Thus, when the refrigerant starts leaking, the compressor isn’t able to fulfill its purpose.

Besides possessing a risk to your heating and AC in Fort Worth, TX, leaked refrigerant can pose certain health hazards as well. These health hazards include headaches, coughs, nausea and irritated eyes. Also, if the refrigerant keeps leaking, and you don’t take note of it, your heating and AC system in Fort Worth, TX will eventually reach a dead end. It may stop working and may come across a system failure. This is why it is important to take note of any moisture leaks in front of the main system, to ensure that no refrigerant is leaking, and that the compressor is performing at its optimal condition.

Diminished Airflow

Now that we have talked about the physically visible symptoms of a deteriorating compressor, we will look at some of the more subtle symptoms of a compressor that is about to go down. Most homeowners are often quick to response to these symptoms. One of the first subtle symptoms that you will see as a sign of your compressor’s poor performance is diminished air flow.

The diminished air flow is often a sign of a bad compressor, because the compressor is now not delivering the air flow that you were previously accustomed to. It does not have the same capabilities anymore, and is barely meeting the expectations you have from it. As a result of this, you will have lesser air coming out from your vents. Since we as humans can feel the reduced air flow through our sense of touch, you should contact a repairman immediately to take care of your heating and AC repair in Fort Worth, TX.

Warmer Air

In cases where the air flow is still sufficient, you can tell of the compressor failing through the reduced coolness in the air. A cooling system should deliver cool air through the vents. If you system keeps giving hot air, even if you have reduced the temperature, then your compressor could have gone bad. The compressor plays an important part in ensuring cold air, and it would most probably be put to blame, if you don’t have cold air coming through. The best way to go about this is to have someone look at your compressor and give it the fine tuning that it needs. If the compressor has been damaged beyond repair, then you might need a new one.

If you experience compressor problems with your heating and AC system in Fort Worth, TX, then you should head over to One Hour Heating and Air. They have the best repairmen for handling troubles with your HVAC system.