The Most Common Reasons Why My Heating and AC System Needs Repair | Fort Worth, TX
Photo By BanksPhotos at istock
Those who live in the Fort Worth, TX area know just how important their heating and AC unit are to their overall quality of life. Therefore, when something goes wrong with the heating and AC unit, this is a problem that needs to be addressed immediately. While it is always a good idea to rely on a professional heating and AC repair service for assistance with these issues, it is also a good idea to know some of the most common reasons why a heating and AC system might not be working properly. Thinking about these potential problems ahead of time can give the professional heating and AC repair service a good place to start. Therefore, take a look at some of the most common reasons why a heating and AC system in Fort Worth, TX might not be working properly. This can save people a lot of time and money.
The Entire System Has Not Been Maintained
Without a doubt, one of the most common reasons why a heating and AC unit might not be working is that the maintenance has not been done on the unit properly. There is a reason why people are told to keep their maintenance up to date with the help of a professional heating and AC repair service. This is because this can prevent repairs from being required down the line.
We know that many people try to save money by skipping the cost of routine maintenance; however, this is only going to end up costing people more money in the end. When a system has not been maintained in a proper manner, the end result is that something with the system is going to break. As a result, people are going to end up calling a professional heating and AC repair technician for help anyways. Then, the repair bill is going to be far more expensive. In order to avoid these expensive repair bills, it is important to make sure that all maintenance is done on time. This can help extend the life of the system and prevent a major repair bill later.
The Batteries Are Dead in the Thermostat
One of the most common problems we see in Fort Worth, TX when it comes to reasons why a heating and AC unit might not be working as it should is that the batteries are dead. There are batteries that power the thermostat in the heating and AC system. This thermostat is important because it tells the system how hot or cold the external environment is. Then, based on this temperature, the heating and AC system is able to turn on or off. Therefore, if the batteries in the heating and AC system aren’t working properly, the heating and AC system will not know when to turn on or off.
With this in mind, it is important for everyone to make sure the thermostat is working properly. In order to ensure this is happening, be sure to rely on the professional heating and AC repair service for assistance. The pros can come by and take a look at the heating and AC system regularly. If something is wrong with the thermostat, such as dead batteries, then they can address this and make sure the heating and AC thermostat is up and running again.
By the way, it is also important to make sure the thermostat is set to either heat or cool based on the time of year. This can influence the temperature of the air coming out of the heating and AC system.
There Is a Leak in the Ductwork
Another possible reason why the heating and AC system might not be working properly is that there is a problem with the ductwork throughout the building. The ductwork is used to make sure the air gets where it needs to go. It runs throughout the entire building in a tube system. This system keeps the air from leaking out the ductwork and into the external environment. As a result, if something is wrong with the ductwork, the result is going to be hot or cold air ending up somewhere else.
It is important for everyone to make sure the ductwork of their system is intact. This is a critical part of making sure routine maintenance is handled on time. A professional heating and AC repair service can come out and take a look at the entire system. If something is wrong with the ductwork, this can be addressed with the help of the professional technicians. Sometimes, there is an issue with the ductwork.
There Is an Issue with the Circuit Breaker
Another possible reason why the heating and AC system might not be working properly is that there is a problem with the circuit breaker. This is a possible issue if people do not hear the heating and AC system working at all. If it isn’t turning on, then there isn’t any power going to the system. The likely culprit is that a circuit breaker was tripped.
Now, the reason why the circuit breaker was tripped is another issue entirely. To figure out the answer to this question, people need to call a professional heating and AC repair service. The technicians can come out and take a look at the system from top to bottom. Typically, a circuit breaker is going to end up getting tripped because the heating and AC was working too hard. As a result, the circuit got overloaded and the breaker was tripped to prevent a disaster from happening.
Trust the professionals to figure out why the heating and AC system was working so hard. It might be an issue with the blower, the filter, the pilot light, or something else entirely. Regardless, this problem needs to be addressed. Otherwise, the circuit breaker is just going to trip again. This will create an endless cycle that a professional heating and AC repair service will need to help break.
There Is a Component of the System That Has Blown
In a case where the circuit breaker might not have tripped, there might be a component of the system that has blown entirely. There are two options for a blown piece of equipment. The first option is a blown fuse. This is similar to the battery dying in a car. This fuse powers the thermostat. A professional heating and AC repair service will need to come out and take a look at the fuse. Then, the fuse can be replaced and the entire system will boot up once again. Do not attempt to fix this problem alone. Special training is needed to prevent someone from hurting himself or herself.
The other possible fuse that might have blown is located in the transformer While the problem is similar, the location is different. A transformer is needed to ensure the heating and AC has a source of power. With the transformer, the wiring of the heating and AC system is not going to work. Again, replacing a transformer is going to take special training. It is important for everyone to rely on a professional heating and AC repair service to handle this job. Otherwise, someone could end up getting hurt.
There Is an Issue with the Starting Components
The next most common reason why someone’s heating and AC system might not be working is that there is an issue with the components it needs to start. There are a couple of components that are necessary in order for the system to start. This includes two capacitors inside the outdoor unit. One is the start capacitor and the other is the run capacitor. They look like giant batteries because this is exactly what they do. These units hold the power for the unit and allow the heating and AC system to not only turn on but stay on as well.
Unfortunately, after a while, these units are going to break and will need to be replaced. This is where it is important to call a professional heating and AC repair service for help. A professional heating and AC repair service will be able to come out and take a look at the capacitors. If something has happened to the capacitors, then a professional heating and AC repair technician can make sure they get replaced in a proper manner. Then, the system will boot up once again!
There Is a Problem with the Coils Inside or Outside
Another possible reason why the heating and AC system might not be working has to do with the coils. If the thermostat has been set to cool but there isn’t any cold air coming out of the system, then the issue might be the coils. The coils play a critical role because they absorb heat from the air and allow the system to emit cold air on the other side. Those who live in Fort Worth, TX know how important this ability is.
Over time, the coils are going to start to get dirty. There are two coils. One is located in the outdoor unit and the other is located with the indoor unit. Over time, these coils might get dirty. They might get dirty faster if the heating and AC system is behind on its maintenance. This is just another reason why it is important for everyone to make sure that all maintenance is performed on time.
If the coils are dirty, then the system is not going to be able to remove heat from the home. This is going to lead to a call to a professional heating and AC repair service who can come out and take a look at the coils. Without clean coils, the system is going to circulate air that is the same temperature. Eventually, the heating and AC repair service will clean the coils and the system should function properly once again.
There Are Filters That Need to be Changed
Finally, one of the most common reasons why the heating and AC system isn’t working right is that there are filters that need to be changed. The filters for an HVAC system play a critical role. Their job is to make sure that clean air enters the system and that any and all debris has been removed. It is important to make sure a heating and AC repair service changes these filters on a regular basis. If the filters are not changed, then they are going to collect dust and debris. As a result, the air is not going to be able to reach the system and it will not work properly.
A professional heating and AC repair service can come out and take a look at the filters. If something is off with the filters, they can be replaced. Then, the system should start working properly once again. Anyone who has questions about the filters for their HVAC system should reach out to a professional heating and AC repair service to learn more.
Trust One Hour Air Conditioning and Heating of Fort Worth, TX for All HVAC Needs
Those who live in the Fort Worth, TX area need to have a reliable, professional heating and air conditioning repair service who can make sure the system stays up and running during the hottest months of the year. The summers in this area can be brutal, which is why we place the needs of our customers first. Our professionals have the training and expertise to handle almost any issue that might come up with an HVAC unit. We will make sure that your unit is working when it is needed most. If there is an issue with the system, we will come out and take a look in a timely manner. We do not want our customers to go without these necessities. To learn more about how we can help you, please call us today to make an appointment. We look forward to meeting you!